diff clojure/com/aurellem/assembly.clj @ 126:86f92deacd2a

completed mode 3
author Robert McIntyre <rlm@mit.edu>
date Sat, 17 Mar 2012 02:25:48 -0500
parents d2e00c923bad
children 901ee6b648da
line wrap: on
line diff
     1.1 --- a/clojure/com/aurellem/assembly.clj	Sat Mar 17 02:00:02 2012 -0500
     1.2 +++ b/clojure/com/aurellem/assembly.clj	Sat Mar 17 02:25:48 2012 -0500
     1.3 @@ -623,9 +623,9 @@
     1.4     0x05   ;D381                    ;  5 variables:
     1.5     0x00   ;D382                    ;    current-mode
     1.6     0x00   ;D383                    ;    bytes-to-write
     1.7 -   0x00   ;D384                    ;    start-point
     1.8 -   0x00   ;D385                    ;    bytes-written
     1.9 -   0x00   ;D386                    ;    unused
    1.10 +   0x00   ;D384                    ;    bytes-written
    1.11 +   0x00   ;D385                    ;    start-point-high
    1.12 +   0x00   ;D386                    ;    start-point-low
    1.13  
    1.14  
    1.15     ;; banch on current mode
    1.16 @@ -651,7 +651,7 @@
    1.17     0xB1   ;D393 
    1.18     0xD3   ;D394                    ; goto Mode 1 if A == 1
    1.19  
    1.20 -   ;; GOTO Mode 2 (set-start-point) if current mode is 2
    1.21 +   ;; GOTO Mode 2 (set-start-point-high) if current mode is 2
    1.22     0xFE   ;D395                    
    1.23     0x02   ;D396                    ; compare A with 0x02
    1.24  
    1.25 @@ -659,14 +659,15 @@
    1.26     0xBF   ;D398
    1.27     0xD3   ;D399                    ; goto Mode 2 if A == 2
    1.28  
    1.29 -   ;; GOTO Mode 3 (write-memory) if current mode is 3
    1.30 +   ;; GOTO Mode 3 (set-start-point-low) if current mode is 3
    1.31     0xFE   ;D39A
    1.32     0x03   ;D39B
    1.33  
    1.34 -   0x00   ;D39C
    1.35 -   0xCA   ;D39D
    1.36 -   0xXX   ;D39E
    1.37 -   0xXX   ;D39F
    1.38 +   0xCA   ;D39C
    1.39 +   0xCD   ;D39D
    1.40 +   0xD3   ;D39E                    ; goto Mode 3 if A == 3
    1.41 +
    1.42 +   0x00   ;D39F
    1.43     0x00   ;D3A0
    1.44     0x00   ;D3A1
    1.45     0x00   ;D3A2
    1.46 @@ -727,20 +728,20 @@
    1.47     ;; End Mode 1
    1.48  
    1.49  
    1.50 -   ;; Mode 2 -- set start-point mode
    1.51 -   ;;      Final part of the header for writing things to memory.
    1.52 +   ;; Mode 2 -- set start-point-high mode
    1.53 +   ;;      Middle part of the header for writing things to memory.
    1.54     ;;      User specifies the start location in RAM to which 
    1.55     ;;      data will be written.
    1.56     ;;      Mode is auto advanced to Mode 3 after this mode completes.
    1.57  
    1.58 -   ;;      Set start-point to input-number;
    1.59 +   ;;      Set start-point-high to input-number;
    1.60     ;;      set current mode to 0x03.
    1.61     0xFA   ;D3BF                   ; load input-number (0xD352)
    1.62     0x52   ;D3C0                   ; into A
    1.63     0xD3   ;D3C1
    1.64  
    1.65 -   0xEA   ;D3C2                   ; load A into start-point
    1.66 -   0x84   ;D3C3                   ; (0xD384)
    1.67 +   0xEA   ;D3C2                   ; load A into start-point-high
    1.68 +   0x85   ;D3C3                   ; (0xD385)
    1.69     0xD3   ;D3C4
    1.70  
    1.71     0x3E   ;D3C5                   ; load 0x03 into A.
    1.72 @@ -756,7 +757,32 @@
    1.73     ;;End Mode 2
    1.74  
    1.75  
    1.76 -   ;; Mode 3 -- write bytes mode
    1.77 +   ;; Mode 3 -- set-start-point-low mode
    1.78 +   ;;      Final part of header for writing things to memory.
    1.79 +   ;;      User specifies the low bytes of 16 bit start-point.
    1.80 +
    1.81 +   ;;      Set start-point-low to input-number;
    1.82 +   ;;      set current mode to 0x04
    1.83 +   0xFA   ;D3CD                   ; load input-number into A
    1.84 +   0x52   ;D3CE                   
    1.85 +   0xD3   ;D3CF                   
    1.86 +
    1.87 +   0xEA   ;D3D0                   ; load A into start-point-low
    1.88 +   0x86   ;D3D1                   
    1.89 +   0xD3   ;D3D2                   
    1.90 +
    1.91 +   0x3E   ;D3D3                   ; load 0x04 into A.
    1.92 +   0x04   ;D3D4                   
    1.93 +
    1.94 +   0xEA   ;D3D5                   ; load A to current-mode,
    1.95 +   0x82   ;D3D6                   ; advancing from Mode 3 to 
    1.96 +   0xD3   ;D3D7                   ; Mode 4.
    1.97 +
    1.98 +   0xC3   ;D3D8                   ; go back to beginning
    1.99 +   0x1D   ;D3D9                   
   1.100 +   0xD3   ;D3DA                   
   1.101 +   
   1.102 +   ;; Mode 4 -- write bytes mode
   1.103  
   1.104     ;;      This is where RAM manipulation happens.  User supplies
   1.105     ;;      bytes every frame, which are written sequentially to
   1.106 @@ -766,19 +792,15 @@
   1.107     ;;   compare bytes-written with bytes-to-write.
   1.108     ;;   if they are the same, then reset mode to 0
   1.109    
   1.110 -   0xFA   ;D3CD                   ; load bytes-to-write into A
   1.111 -   0x83   ;D3CE
   1.112 -   0xD3   ;D3CF
   1.113 -
   1.114 -   0x47   ;D3D0                   ; load A into B
   1.115 -
   1.116 -   0xFA   ;D3D1                   ; load bytes-written into A
   1.117 -   0x82   ;D3D2
   1.118 -   0xD3   ;D3D3
   1.119 -
   1.120 -   0xB8   ;D3D4                   ; compare A with B
   1.121 -
   1.122 -   0xCA   ;D3D5                   ; if they are equal, go to cleanup
   1.123 +   0xFA   ;D3DB                   ; load bytes-to-write into A
   1.124 +   0x83   ;D3DC
   1.125 +   0xD3   ;D3DD
   1.126 +   0x47   ;D3DE                   ; load A into B
   1.127 +   0xFA   ;D3DF                   ; load bytes-written into A
   1.128 +   0x84   ;D3E0
   1.129 +   0xD3   ;D3E1
   1.130 +   0xB8   ;D3E2                   ; compare A with B
   1.131 +   0xCA   ;D3E3                   ; if they are equal, go to cleanup
   1.132  
   1.133     ;;  Write Memory Section
   1.134     ;;    Write the input-number, interpreted as an 8-bit number,
   1.135 @@ -847,7 +869,9 @@
   1.136  (def input 0xD352)
   1.137  (def current-mode 0xD382)
   1.138  (def bytes-to-write 0xD383)
   1.139 -(def start-point 0xD384)
   1.140 +(def start-point-high 0xD385)
   1.141 +(def start-point-low 0xD386)
   1.142 +
   1.143  (def bytes-written 0xD385)
   1.144  
   1.145  (defn write-memory []
   1.146 @@ -895,18 +919,27 @@
   1.147     (#(do (println "step with [:a]") %))
   1.148     (view-memory current-mode)
   1.149     (view-memory bytes-to-write)
   1.150 -   (view-memory start-point)
   1.151 +   (view-memory start-point-high)
   1.152 +   (view-memory start-point-low)
   1.153 +   (#(do (println "step with [:a :b :start]")%))
   1.154 +   (step [:a :b :start])
   1.155 +   (view-memory current-mode)
   1.156 +   (view-memory bytes-to-write)
   1.157 +   (view-memory start-point-high)
   1.158 +   (view-memory start-point-low)
   1.159 +   (#(do (println "step with [:u :d]")%))
   1.160 +   (step [:u :d])
   1.161 +   (view-memory current-mode)
   1.162 +   (view-memory bytes-to-write)
   1.163 +   (view-memory start-point-high)
   1.164 +   (view-memory start-point-low)
   1.165     (#(do (println "step with [:u :d :l :r]")%))
   1.166     (step [:u :d :l :r])
   1.167     (view-memory current-mode)
   1.168     (view-memory bytes-to-write)
   1.169 -   (view-memory start-point)
   1.170 -   (#(do (println "step with [:u :d]")%))
   1.171 -   (step [:u :d])
   1.172 -   (view-memory current-mode)
   1.173 -   (view-memory bytes-to-write)
   1.174 -   (view-memory start-point)
   1.175 -
   1.176 +   (view-memory start-point-high)
   1.177 +   (view-memory start-point-low)
   1.178 +   
   1.179     ))
   1.180  
   1.181