annotate clojure/com/aurellem/gb/rlm_assembly.clj @ 425:df4e03672b05

implemented note-code message.
author Robert McIntyre <rlm@mit.edu>
date Mon, 23 Apr 2012 05:45:25 -0500
parents 21b8b3350b20
children 9068685e7d96
rev   line source
rlm@377 1 (ns com.aurellem.gb.rlm-assembly
rlm@377 2 "Version of main bootstrap program that is valid output for the
rlm@377 3 item-writer program."
rlm@377 4 (:use (com.aurellem.gb gb-driver assembly util vbm constants))
rlm@377 5 (:import [com.aurellem.gb.gb_driver SaveState]))
rlm@377 6
rlm@414 7 (defn pc-item-writer-program
rlm@414 8 []
rlm@414 9 (let [limit 201
rlm@414 10 [target-high target-low] (disect-bytes-2 pokemon-list-start)]
rlm@414 11 (flatten
rlm@414 12 [[0x00 ;; (item-hack) set increment stack pointer no-op
rlm@414 13 0x1E ;; load limit into E
rlm@414 14 limit
rlm@414 15 0x3F ;; (item-hack) set carry flag no-op
rlm@414 16
rlm@414 17 ;; load 2 into C.
rlm@414 18 0x0E ;; C == 1 means input-first nybble
rlm@414 19 0x04 ;; C == 0 means input-second nybble
rlm@414 20
rlm@414 21 0x21 ;; load target into HL
rlm@414 22 target-low
rlm@414 23 target-high
rlm@414 24 0x37 ;; (item-hack) set carry flag no-op
rlm@414 25
rlm@414 26 0x00 ;; (item-hack) no-op
rlm@414 27 0x37 ;; (item-hack) set carry flag no-op
rlm@414 28
rlm@414 29 0x00 ;; (item-hack) no-op
rlm@414 30 0xF3 ;; disable interrupts
rlm@414 31 ;; Input Section
rlm@414 32
rlm@414 33 0x3E ;; load 0x20 into A, to measure buttons
rlm@414 34 0x10
rlm@414 35
rlm@414 36 0x00 ;; (item-hack) no-op
rlm@414 37 0xE0 ;; load A into [FF00]
rlm@414 38 0x00
rlm@414 39
rlm@414 40 0xF0 ;; load 0xFF00 into A to get
rlm@414 41 0x00 ;; button presses
rlm@414 42
rlm@414 43 0xE6
rlm@414 44 0x0F ;; select bottom four bits of A
rlm@414 45 0x37 ;; (item-hack) set carry flag no-op
rlm@414 46
rlm@414 47 0x00 ;; (item-hack) no-op
rlm@414 48 0xB8 ;; see if input is different (CP A B)
rlm@414 49
rlm@414 50 0x00 ;; (item-hack) (INC SP)
rlm@414 51 0x28 ;; repeat above steps if input is not different
rlm@414 52 ;; (jump relative backwards if B != A)
rlm@414 53 0xED ;; (literal -19) (item-hack) -19 == egg bomb (TM37)
rlm@414 54
rlm@414 55 0x47 ;; load A into B
rlm@414 56
rlm@414 57 0x0D ;; dec C
rlm@414 58 0x37 ;; (item-hack) set-carry flag
rlm@414 59 ;; branch based on C:
rlm@414 60 0x20 ;; JR NZ
rlm@414 61 23 ;; skip "input second nybble" and "jump to target" below
rlm@414 62
rlm@414 63 ;; input second nybble
rlm@414 64
rlm@414 65 0x0C ;; inc C
rlm@414 66 0x0C ;; inc C
rlm@414 67
rlm@414 68 0x00 ;; (item-hack) no-op
rlm@414 69 0xE6 ;; select bottom bits
rlm@414 70 0x0F
rlm@414 71 0x37 ;; (item-hack) set-carry flag no-op
rlm@414 72
rlm@414 73 0x00 ;; (item-hack) no-op
rlm@414 74 0xB2 ;; (OR A D) -> A
rlm@414 75
rlm@414 76 0x22 ;; (do (A -> (HL)) (INC HL))
rlm@414 77
rlm@414 78 0x1D ;; (DEC E)
rlm@414 79
rlm@414 80 0x00 ;; (item-hack)
rlm@414 81 0x20 ;; jump back to input section if not done
rlm@414 82 0xDA ;; literal -36 == TM 18 (counter)
rlm@414 83 0x01 ;; (item-hack) set BC to literal (no-op)
rlm@414 84
rlm@414 85 ;; jump to target
rlm@414 86 0x00 ;; (item-hack) these two bytes can be anything.
rlm@414 87 0x01
rlm@414 88
rlm@414 89 0x00 ;; (item-hack) no-op
rlm@414 90 0xBF ;; (CP A A) ensures Z
rlm@414 91
rlm@414 92 0xCA ;; (item-hack) jump if Z
rlm@414 93 target-low
rlm@414 94 target-high
rlm@414 95 0x01 ;; (item-hack) will never be reached.
rlm@414 96
rlm@414 97 ;; input first nybble
rlm@414 98 0x00
rlm@414 99 0xCB
rlm@414 100 0x37 ;; swap nybbles on A
rlm@414 101
rlm@414 102 0x57 ;; A -> D
rlm@414 103
rlm@414 104 0x37 ;; (item-hack) set carry flag no-op
rlm@414 105 0x18 ;; relative jump backwards
rlm@414 106 0xCD ;; literal -51 == TM05; go back to input section
rlm@414 107 0x01 ;; (item-hack) will never reach this instruction
rlm@414 108
rlm@414 109 ]
rlm@414 110 (repeat 8 [0x00 0x01]);; these can be anything
rlm@414 111
rlm@414 112 [;; jump to actual program
rlm@414 113 0x00
rlm@414 114 0x37 ;; (item-hack) set carry flag no-op
rlm@414 115
rlm@414 116 0x2E ;; 0x3A -> L
rlm@414 117 0x3A
rlm@414 118
rlm@414 119
rlm@414 120 0x00 ;; (item-hack) no-op
rlm@414 121 0x26 ;; 0xD5 -> L
rlm@414 122 0xD5
rlm@414 123 0x01 ;; (item-hack) set-carry BC
rlm@414 124
rlm@414 125 0x00 ;; (item-hack) these can be anything
rlm@414 126 0x01
rlm@414 127
rlm@414 128 0x00
rlm@414 129 0xE9 ;; jump to (HL)
rlm@414 130 ]])))
rlm@414 131
rlm@390 132
rlm@390 133
rlm@377 134 ;; Specs for Main Bootstrap Program
rlm@377 135
rlm@377 136 ;; Number-Input
rlm@377 137 ;; Number input works using all eight buttons to
rlm@377 138 ;; spell out an 8 bit number. The order of buttons is
rlm@377 139 ;; [:d :u :l :r :start :select :b :a] --> 11111111
rlm@377 140 ;; [ :l :start :a] --> 00101001
rlm@377 141
rlm@409 142 ;;; MODES
rlm@409 143 ;; There are five modes in total:
rlm@409 144 ;; MODE-SELECT
rlm@409 145 ;; SET-H
rlm@409 146 ;; SET-L
rlm@409 147 ;; WRITE
rlm@409 148 ;; JUMP
rlm@409 149
rlm@377 150 ;;; MODE-SELECT
rlm@377 151 ;; The bootstrap program starts in MODE-SELECT mode.
rlm@377 152 ;; MODE-SELECT transitions to one of three modes depending
rlm@377 153 ;; on which buttons are pressed:
rlm@409 154 ;; 0 : MODE-SELECT
rlm@409 155 ;; 0x67 : SET-H
rlm@409 156 ;; 0x6F : SET-L
rlm@409 157 ;; 0x47 : WRITE
rlm@409 158 ;; 0xE9 : JUMP
rlm@409 159
rlm@409 160 ;;; SET-H
rlm@409 161 ;; SET-H sets the high 8 bits of the target address to which
rlm@409 162 ;; data will be written / the program will jump. It expects
rlm@409 163 ;; the following:
rlm@409 164 ;;
rlm@409 165 ;; Byte 0 : New Value of H
rlm@409 166 ;; Byte 1 : 0x00
rlm@409 167
rlm@409 168 ;;; SET-L
rlm@409 169 ;; This mode sets the low 8 bits of the target address and has
rlm@409 170 ;; the same semantics as SET-H.
rlm@377 171
rlm@377 172 ;;; WRITE-BYTES
rlm@377 173 ;; WRITE-BYTES mode writes sequences of arbitray values to
rlm@377 174 ;; arbitray memory locations. It expects you to enter a
rlm@409 175 ;; header of one byte describing how many bytes to write.
rlm@377 176
rlm@377 177 ;; Byte 0 : Number of Bytes to Write
rlm@377 178
rlm@377 179 ;; Then, you enter the number of bytes specified in Byte 0
rlm@409 180 ;; and they are written to the start address in sequence.
rlm@409 181 ;; After the last byte is written control returns to
rlm@409 182 ;; MODE-SELECT mode. The Target address will be incremented by
rlm@409 183 ;; Number of Bytes to Write once you are done writing.
rlm@377 184
rlm@377 185 ;; Example: to write the sequence [1 2 3 4] starting at
rlm@409 186 ;; the target address enter:
rlm@377 187 ;; Byte 0 : 4 (will write four bytes)
rlm@377 188 ;; Byte 3 : 1 (write 1 to 0xC01F)
rlm@377 189 ;; Byte 4 : 2 (write 2 to 0xC020)
rlm@377 190 ;; Byte 5 : 3 (write 3 to 0xC021)
rlm@377 191 ;; Byte 6 : 4 (write 4 to 0xC022)
rlm@377 192
rlm@377 193 ;;; JUMP
rlm@409 194 ;; JUMP mode jumps program control to the target address.
rlm@377 195
rlm@409 196 ;;; EXAMPLE
rlm@409 197 ;; To write the infinite loop program [0x18 0xFE] to address
rlm@409 198 ;; 0xC00F and then jump to said program, enter the following
rlm@409 199 ;; starting from MODE-SELECT mode.
rlm@377 200
rlm@409 201 ;; Byte 0 : 0x67 [:a :b :l :u :select] ;; SET-H mode
rlm@409 202 ;; Byte 1 : 0xC0 [:d :u] ;; 0xC0 -> H
rlm@409 203 ;; Byte 2 : 0x00 [] ;; trailer
rlm@409 204
rlm@409 205 ;; Byte 3 : 0x6F [:a :start :b :l :u :select] ;; SET-L mode
rlm@409 206 ;; Byte 4 : 0x0F [:a :start :b :select] ;; 0x0F -> L
rlm@409 207 ;; Byte 5 : 0x00 [] ;; trailer
rlm@409 208
rlm@409 209 ;; Byte 6 : 0x47 [:a :b :u :select] ;; WRITE-MODE
rlm@409 210 ;; Byte 7 : 0x02 [:b] ;; write 2 bytes
rlm@409 211 ;; Byte 8 : 0x18 [:r :start] ;; assembly
rlm@409 212 ;; Byte 9 : 0xFE [:r :start :b :d :l :u :select] ;; assembly
rlm@409 213
rlm@409 214 ;; target address is now 0xC011 since we wrote 2 bytes.
rlm@409 215 ;; set it back to 0xC00F.
rlm@409 216
rlm@409 217 ;; Byte 10 : 0x6F [:a :start :b :l :u :select] ;; SET-L mode
rlm@409 218 ;; Byte 12 : 0x0F [:a :start :b :select] ;; 0x0F -> L
rlm@409 219 ;; Byte 13 : 0x00 [] ;; trailer
rlm@409 220
rlm@409 221 ;; Byte 14 : 0xE9 ;; JUMP-MODE
rlm@377 222
rlm@378 223 (defn ->signed-8-bit [n]
rlm@378 224 (if (< n 0)
rlm@378 225 (+ 256 n) n))
rlm@378 226
rlm@416 227 (defn frame-metronome []
rlm@404 228 (let [init [0xC5] ;; save value of BC
rlm@404 229 timing-loop
rlm@404 230 [0x01 ; \
rlm@404 231 0x43 ; |
rlm@404 232 0xFE ; | load 0xFF44 into BC without repeats
rlm@404 233 0x0C ; |
rlm@404 234 0x04 ; /
rlm@404 235 0x0A] ;; (BC) -> A, now A = LY (vertical line coord)
rlm@404 236 continue-if-144
rlm@404 237 [0xFE
rlm@404 238 144 ;; compare LY (in A) with 144
rlm@404 239 0x20 ;; jump back to beginning if LY != 144 (not-v-blank)
rlm@404 240 (->signed-8-bit
rlm@404 241 (+ -4 (- (count timing-loop))))]
rlm@404 242 spin-loop
rlm@404 243 [0x05 ;; dec B, which is 0xFF
rlm@404 244 0x20 ;; spin until B==0
rlm@404 245 0xFD]]
rlm@404 246 (concat init timing-loop continue-if-144 spin-loop)))
rlm@404 247
rlm@404 248 (defn frame-metronome* []
rlm@404 249 [0x3E ;; smallest version, but uses repeated nybbles
rlm@416 250 0x01
rlm@404 251 0xE0
rlm@404 252 0xFF])
rlm@404 253
rlm@416 254 (defn frame-metronome** []
rlm@404 255 [0x06 ;; load 0xFE into B
rlm@404 256 0xFE
rlm@404 257 0x04 ;; inc B, now B == FF
rlm@416 258
rlm@416 259 0x3E ;; RLM-debug
rlm@404 260 0x01 ;; 1->A
rlm@416 261
rlm@404 262 0x48 ;; B->C
rlm@404 263 0x02]) ;; A->(BC) set exclusive v-blank interrupt
rlm@378 264
rlm@379 265 (defn test-frame-metronome
rlm@379 266 "Ensure that frame-metronome ticks exactly once every frame."
rlm@379 267 ([] (test-frame-metronome 151))
rlm@379 268 ([steps]
rlm@416 269 (let [inc-E [0x1C 0x18
rlm@416 270 (->signed-8-bit
rlm@416 271 (+ -3
rlm@416 272 (-(count (frame-metronome)))))]
rlm@404 273
rlm@388 274 program (concat (frame-metronome) inc-E)
rlm@379 275 count-frames
rlm@379 276 (-> (tick (mid-game))
rlm@379 277 (IE! 0)
rlm@388 278 (DE! 0)
rlm@379 279 (set-memory-range pokemon-list-start program)
rlm@379 280 (PC! pokemon-list-start))
rlm@390 281 E-after-moves
rlm@390 282 (E (run-moves count-frames (repeat steps [])))]
rlm@405 283 ;;(println "E:" E-after-moves)
rlm@388 284 (assert (= steps E-after-moves))
rlm@405 285 (println "frame-count test passed.")
rlm@379 286 count-frames)))
rlm@379 287
rlm@384 288 (defn read-user-input []
rlm@416 289 [0x3E
rlm@388 290 0x20 ; prepare to measure d-pad
rlm@384 291
rlm@405 292 0x3F ; clear carry flag no-op to prevent repeated nybbles
rlm@405 293
rlm@388 294 0x01 ;\
rlm@388 295 0x01 ; |
rlm@388 296 0xFE ; | load 0xFF00 into BC without repeats
rlm@388 297 0x04 ; |
rlm@388 298 0x0D ;/
rlm@386 299
rlm@388 300 0x02
rlm@388 301 0x0A ;; get D-pad info
rlm@385 302
rlm@385 303 0xF5 ;; push AF
rlm@385 304
rlm@385 305 0x3E
rlm@388 306 0x10 ; prepare to measure buttons
rlm@388 307
rlm@388 308 0x3F ;; clear carry flag no-op to prevent repeated nybbbles
rlm@385 309
rlm@388 310 0x02
rlm@388 311 0x0A ;; get button info
rlm@385 312
rlm@384 313 0xE6 ;; select bottom bits of A
rlm@384 314 0x0F
rlm@384 315
rlm@388 316 0x47 ;; A->B
rlm@385 317
rlm@385 318 0xF1 ;; pop AF
rlm@385 319
rlm@385 320 0xE6
rlm@385 321 0x0F ;; select bottom bits of A
rlm@385 322
rlm@384 323 0xCB
rlm@384 324 0x37 ;; swap A nybbles
rlm@387 325
rlm@388 326 0xB0 ;; (or A B) -> A
rlm@387 327
rlm@384 328 0x2F ;; (NOT A) -> A
rlm@384 329 ])
rlm@384 330
rlm@384 331 (defn test-read-user-input []
rlm@384 332 (let [program
rlm@384 333 (concat
rlm@384 334 (frame-metronome) (read-user-input)
rlm@388 335 [0x5F ;; A-> E
rlm@404 336 0x76
rlm@384 337 0x18
rlm@384 338 (->signed-8-bit
rlm@404 339 (+ (- (count (read-user-input)))
rlm@404 340 (- 4)))])
rlm@384 341 read-input
rlm@384 342 (-> (tick (mid-game))
rlm@384 343 (IE! 0)
rlm@384 344 (set-memory-range pokemon-list-start program)
rlm@384 345 (PC! pokemon-list-start))]
rlm@384 346 (dorun
rlm@404 347 (for [i (range 0x100)]
rlm@404 348 (assert (= (E (step read-input (buttons i))) i))))
rlm@405 349 (println "tested all inputs.")
rlm@384 350 read-input))
rlm@384 351
rlm@393 352 (def symbol-index
rlm@393 353 (fn [symbol sequence]
rlm@393 354 (count (take-while
rlm@393 355 (partial not= symbol)
rlm@393 356 sequence))))
rlm@385 357
rlm@403 358 (defn main-bootstrap-program
rlm@403 359 ([] (main-bootstrap-program pokemon-list-start))
rlm@403 360 ([start-address]
rlm@403 361 ;; Register Use:
rlm@403 362
rlm@403 363 ;; ED non-volitale scratch
rlm@403 364
rlm@403 365 ;; A user-input
rlm@403 366 ;; HL target-address
rlm@403 367 ;; B bytes-to-write
rlm@403 368 ;; C non-volatile scratch
rlm@385 369
rlm@403 370 ;; Modes (with codes) are:
rlm@390 371
rlm@403 372 ;; single-action-modes:
rlm@403 373 ;; SET-TARGET-HIGH 0x67 ;; A->H
rlm@403 374 ;; SET-TARGET-LOW 0x6F ;; A->L
rlm@403 375 ;; JUMP 0xE9 ;; jump to (HL)
rlm@390 376
rlm@403 377 ;; multi-action-modes
rlm@403 378 ;; WRITE 0x47 ;; A->B
rlm@390 379
rlm@416 380 (let [init [0xAF 0x4F 0x47] ;; 0->A; 0->C; 0->B
rlm@416 381 header (concat (frame-metronome) (read-user-input))
rlm@404 382
rlm@403 383 input
rlm@403 384 [0xC1 ;; pop BC so it's not volatile
rlm@388 385
rlm@403 386 0x5F ;; A->E
rlm@403 387 0xAF ;; test for output-mode (bytes-to-write > 0)
rlm@403 388 0xB8 ;; (cp A B)
rlm@403 389 0x7B ;; E->A
rlm@403 390 0x20 ;; skip to output section if
rlm@403 391 :to-output ;; we're not in input mode
rlm@403 392
rlm@403 393 :to-be-executed
rlm@391 394
rlm@403 395 ;; write mode to instruction-to-be-executed (pun)
rlm@403 396 0xEA
rlm@403 397 :to-be-executed-address
rlm@388 398
rlm@403 399 ;; protection region -- do not queue this op for
rlm@403 400 ;; execution if the last one was non-zero
rlm@403 401 0x79 ;; C->A
rlm@403 402 0xA7 ;; test A==0
rlm@403 403 0x28
rlm@403 404 0x04
rlm@403 405 0xAF ;; put a no op (0x00) in to-be-executed
rlm@403 406 0xEA ;;
rlm@403 407 :to-be-executed-address
rlm@403 408
rlm@403 409 0x7B ;; E->A
rlm@403 410 0x4F ;; A->C now C stores previous instruction
rlm@403 411 0x18 ;; return
rlm@416 412 :to-jump]
rlm@403 413
rlm@403 414 output
rlm@403 415 [:output-start ;; just a label
rlm@405 416 0x3F ;; ;; prevent repeated nybbles
rlm@403 417 0x54 ;;
rlm@403 418 0x5D ;; HL->DE \
rlm@404 419 ;; | This mess is here to do
rlm@403 420 0x12 ;; A->(DE) | 0x22 (LDI (HL), A) without
rlm@405 421 ;; / any repeating nybbles
rlm@403 422 0x05 ;; DEC bytes-to-write (B)
rlm@391 423
rlm@405 424 0x23 ;; inc HL
rlm@405 425
rlm@403 426 0x18
rlm@404 427 :to-beginning]
rlm@404 428
rlm@403 429 symbols
rlm@403 430 {:to-be-executed-address
rlm@403 431 (reverse
rlm@403 432 (disect-bytes-2
rlm@404 433 (+ start-address
rlm@404 434 (count header)
rlm@416 435 (count init)
rlm@403 436 (symbol-index :to-be-executed input))))
rlm@405 437 :to-be-executed 0x3F} ;; clear carry flag no-op
rlm@392 438
rlm@403 439 program** (flatten
rlm@416 440 (replace
rlm@416 441 symbols
rlm@416 442 (concat init header input output)))
rlm@404 443
rlm@403 444 resolve-internal-jumps
rlm@403 445 {:output-start []
rlm@403 446 :to-output
rlm@403 447 (->signed-8-bit
rlm@403 448 (dec
rlm@403 449 (- (symbol-index :output-start program**)
rlm@403 450 (symbol-index :to-output program**))))}
rlm@391 451
rlm@403 452 program*
rlm@403 453 (flatten (replace resolve-internal-jumps program**))
rlm@403 454
rlm@403 455 resolve-external-jumps
rlm@416 456 {:to-jump
rlm@404 457 (- (- (symbol-index :to-beginning program*)
rlm@416 458 (symbol-index :to-jump program*)) 2)
rlm@404 459
rlm@404 460 :to-beginning
rlm@403 461 (->signed-8-bit
rlm@416 462 (+ (count init) -1
rlm@404 463 (- (symbol-index :to-beginning program*))))}
rlm@389 464
rlm@403 465 program
rlm@403 466 (replace resolve-external-jumps program*)]
rlm@403 467 program)))
rlm@414 468
rlm@414 469
rlm@414 470 (defn no-consecutive-repeats? [seq]
rlm@414 471 (not (contains? (set(map - seq (rest seq))) 0)))
rlm@414 472
rlm@414 473 (defn byte->nybbles [byte]
rlm@414 474 [(bit-shift-right byte 4) (bit-and byte 0x0F)])
rlm@414 475
rlm@414 476 (defn bootstrap-pattern
rlm@414 477 "Given an assembly sequence, generate the keypresses required to
rlm@414 478 create that sequence in memory using the pc-item-writer
rlm@414 479 program. The assembly must not have any consecutive repeating
rlm@414 480 nybbles."
rlm@414 481 [assembly]
rlm@414 482 (let [nybbles (flatten (map byte->nybbles assembly))
rlm@414 483 moves (map (comp buttons (partial - 15)) nybbles)
rlm@414 484 header (map buttons
rlm@414 485 (concat (repeat
rlm@414 486 50
rlm@414 487 (- 15 (first nybbles)))
rlm@415 488 [(first nybbles)]))]
rlm@414 489 (assert (no-consecutive-repeats? nybbles))
rlm@415 490 (concat header moves)))
rlm@378 491
rlm@377 492 ;;;;;; TESTS ;;;;;;
rlm@377 493
rlm@401 494 (def set-H-mode 0x67)
rlm@401 495 (def set-L-mode 0x6F)
rlm@401 496 (def jump-mode 0xE9)
rlm@401 497 (def write-mode 0x47)
rlm@401 498
rlm@401 499
rlm@377 500 (defn bootstrap-base []
rlm@377 501 (let [program (main-bootstrap-program pokemon-list-start)]
rlm@377 502 ;; make sure program is valid output for item-writer
rlm@377 503 (-> (tick (mid-game))
rlm@377 504 (set-memory-range pokemon-list-start program)
rlm@400 505 (PC! pokemon-list-start)
rlm@400 506 (step [])
rlm@400 507 (step []))))
rlm@377 508
rlm@400 509 (defn test-set-H []
rlm@400 510 (letfn [(test-H [state n]
rlm@400 511 (let [after
rlm@400 512 (-> state
rlm@402 513 (step (buttons set-H-mode))
rlm@400 514 (step (buttons n))
rlm@400 515 (step []))]
rlm@401 516 ;;(println "desired H =" n "actual =" (H after))
rlm@400 517 (assert (= n (H after)))
rlm@400 518 after))]
rlm@403 519 (let [result (reduce test-H (bootstrap-base) (range 0x100))]
rlm@405 520 (println "set H test passed.")
rlm@403 521 result)))
rlm@400 522
rlm@401 523 (defn test-write-bytes []
rlm@377 524 (let [target-address 0xC00F
rlm@377 525 [target-high target-low] (disect-bytes-2 target-address)
rlm@377 526 assembly [0xF3 0x18 0xFE 0x12]
rlm@377 527 get-mem-region #(subvec (vec (memory %))
rlm@377 528 target-address (+ target-address 20))
rlm@377 529 before (bootstrap-base)
rlm@377 530 after
rlm@377 531 (-> before
rlm@392 532 (step []) ; make sure it can handle blanks
rlm@392 533 (step []) ; at the beginning.
rlm@377 534 (step [])
rlm@402 535 (step (buttons set-H-mode)) ; select set-H
rlm@401 536 (step (buttons target-high))
rlm@401 537 (step [])
rlm@402 538 (step (buttons set-L-mode))
rlm@401 539 (step (buttons target-low))
rlm@401 540 (step [])
rlm@401 541 (step (buttons write-mode))
rlm@392 542 (step (buttons 4)) ; write 4 bytes
rlm@377 543 (step (buttons (nth assembly 0)))
rlm@377 544 (step (buttons (nth assembly 1)))
rlm@377 545 (step (buttons (nth assembly 2)))
rlm@409 546 (step (buttons (nth assembly 3))))]
rlm@405 547 ;;(println "before :" (get-mem-region before))
rlm@405 548 ;;(println "after :" (get-mem-region after))
rlm@405 549 ;;(assert (= assembly (take 4 (get-mem-region after))))
rlm@405 550 (println "write-test-passed.")
rlm@377 551 after))
rlm@377 552
rlm@402 553 (defn test-jump []
rlm@377 554 (let [target-address 0xC00F
rlm@377 555 [target-high target-low] (disect-bytes-2 target-address)
rlm@377 556 post-jump
rlm@402 557 (-> (test-write-bytes)
rlm@402 558 (step (buttons set-H-mode)) ; select set-H
rlm@402 559 (step (buttons target-high))
rlm@377 560 (step [])
rlm@402 561 (step (buttons set-L-mode))
rlm@402 562 (step (buttons target-low))
rlm@377 563 (step [])
rlm@402 564 (step (buttons jump-mode))) ; Select JUMP mode.
rlm@377 565 program-counters
rlm@377 566 (capture-program-counter
rlm@377 567 post-jump
rlm@377 568 10000)]
rlm@377 569 (assert (contains? (set program-counters) target-address))
rlm@405 570 (println "jump test passed.")
rlm@377 571 post-jump))
rlm@402 572
rlm@405 573 (defn test-no-repeated-nybbles []
rlm@405 574 (bootstrap-pattern (main-bootstrap-program))
rlm@405 575 (println "no-repeated-nybbles"))
rlm@402 576
rlm@402 577 (defn run-all-tests []
rlm@402 578 (test-frame-metronome)
rlm@402 579 (test-read-user-input)
rlm@402 580 (test-set-H)
rlm@402 581 (test-write-bytes)
rlm@405 582 (test-jump)
rlm@405 583 (test-no-repeated-nybbles)
rlm@405 584 (println "\n all tests passed."))