Mercurial > spc_convert

     1 // snes_spc 0.9.0. http://www.slack.net/~ant/

     2 

     3 /* Copyright (C) 2004-2007 Shay Green. This module is free software; you

     4 can redistribute it and/or modify it under the terms of the GNU Lesser

     5 General Public License as published by the Free Software Foundation; either

     6 version 2.1 of the License, or (at your option) any later version. This

     7 module is distributed in the hope that it will be useful, but WITHOUT ANY

     8 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS

     9 FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more

    10 details. You should have received a copy of the GNU Lesser General Public

    11 License along with this module; if not, write to the Free Software Foundation,

    12 Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */

    13 

    14 //// Memory access

    15 

    16 #if SPC_MORE_ACCURACY

    17 	#define SUSPICIOUS_OPCODE( name ) ((void) 0)

    18 #else

    19 	#define SUSPICIOUS_OPCODE( name ) dprintf( "SPC: suspicious opcode: " name "\n" )

    20 #endif

    21 

    22 #define CPU_READ( time, offset, addr )\

    23 	cpu_read( addr, time + offset )

    24 

    25 #define CPU_WRITE( time, offset, addr, data )\

    26 	cpu_write( data, addr, time + offset )

    27 

    28 #if SPC_MORE_ACCURACY

    29 	#define CPU_READ_TIMER( time, offset, addr, out )\

    30 		{ out = CPU_READ( time, offset, addr ); }

    31 

    32 #else

    33 	// timers are by far the most common thing read from dp

    34 	#define CPU_READ_TIMER( time, offset, addr_, out )\

    35 	{\

    36 		rel_time_t adj_time = time + offset;\

    37 		int dp_addr = addr_;\

    38 		int ti = dp_addr - (r_t0out + 0xF0);\

    39 		if ( (unsigned) ti < timer_count )\

    40 		{\

    41 			Timer* t = &m.timers [ti];\

    42 			if ( adj_time >= t->next_time )\

    43 				t = run_timer_( t, adj_time );\

    44 			out = t->counter;\

    45 			t->counter = 0;\

    46 		}\

    47 		else\

    48 		{\

    49 			out = ram [dp_addr];\

    50 			int i = dp_addr - 0xF0;\

    51 			if ( (unsigned) i < 0x10 )\

    52 				out = cpu_read_smp_reg( i, adj_time );\

    53 		}\

    54 	}

    55 #endif

    56 

    57 #define TIME_ADJ( n )   (n)

    58 

    59 #define READ_TIMER( time, addr, out )       CPU_READ_TIMER( rel_time, TIME_ADJ(time), (addr), out )

    60 #define READ(  time, addr )                 CPU_READ ( rel_time, TIME_ADJ(time), (addr) )

    61 #define WRITE( time, addr, data )           CPU_WRITE( rel_time, TIME_ADJ(time), (addr), (data) )

    62 

    63 #define DP_ADDR( addr )                     (dp + (addr))

    64 

    65 #define READ_DP_TIMER(  time, addr, out )   CPU_READ_TIMER( rel_time, TIME_ADJ(time), DP_ADDR( addr ), out )

    66 #define READ_DP(  time, addr )              READ ( time, DP_ADDR( addr ) )

    67 #define WRITE_DP( time, addr, data )        WRITE( time, DP_ADDR( addr ), data )

    68 

    69 #define READ_PROG16( addr )                 GET_LE16( ram + (addr) )

    70 

    71 #define SET_PC( n )     (pc = ram + (n))

    72 #define GET_PC()        (pc - ram)

    73 #define READ_PC( pc )   (*(pc))

    74 #define READ_PC16( pc ) GET_LE16( pc )

    75 

    76 // TODO: remove non-wrapping versions?

    77 #define SPC_NO_SP_WRAPAROUND 0

    78 

    79 #define SET_SP( v )     (sp = ram + 0x101 + (v))

    80 #define GET_SP()        (sp - 0x101 - ram)

    81 

    82 #if SPC_NO_SP_WRAPAROUND

    83 #define PUSH16( v )     (sp -= 2, SET_LE16( sp, v ))

    84 #define PUSH( v )       (void) (*--sp = (uint8_t) (v))

    85 #define POP( out )      (void) ((out) = *sp++)

    86 

    87 #else

    88 #define PUSH16( data )\

    89 {\

    90 	int addr = (sp -= 2) - ram;\

    91 	if ( addr > 0x100 )\

    92 	{\

    93 		SET_LE16( sp, data );\

    94 	}\

    95 	else\

    96 	{\

    97 		ram [(uint8_t) addr + 0x100] = (uint8_t) data;\

    98 		sp [1] = (uint8_t) (data >> 8);\

    99 		sp += 0x100;\

   100 	}\

   101 }

   102 

   103 #define PUSH( data )\

   104 {\

   105 	*--sp = (uint8_t) (data);\

   106 	if ( sp - ram == 0x100 )\

   107 		sp += 0x100;\

   108 }

   109 

   110 #define POP( out )\

   111 {\

   112 	out = *sp++;\

   113 	if ( sp - ram == 0x201 )\

   114 	{\

   115 		out = sp [-0x101];\

   116 		sp -= 0x100;\

   117 	}\

   118 }

   119 

   120 #endif

   121 

   122 #define MEM_BIT( rel ) CPU_mem_bit( pc, rel_time + rel )

   123 

   124 unsigned SNES_SPC::CPU_mem_bit( uint8_t const* pc, rel_time_t rel_time )

   125 {

   126 	unsigned addr = READ_PC16( pc );

   127 	unsigned t = READ( 0, addr & 0x1FFF ) >> (addr >> 13);

   128 	return t << 8 & 0x100;

   129 }

   130 

   131 //// Status flag handling

   132 

   133 // Hex value in name to clarify code and bit shifting.

   134 // Flag stored in indicated variable during emulation

   135 int const n80 = 0x80; // nz

   136 int const v40 = 0x40; // psw

   137 int const p20 = 0x20; // dp

   138 int const b10 = 0x10; // psw

   139 int const h08 = 0x08; // psw

   140 int const i04 = 0x04; // psw

   141 int const z02 = 0x02; // nz

   142 int const c01 = 0x01; // c

   143 

   144 int const nz_neg_mask = 0x880; // either bit set indicates N flag set

   145 

   146 #define GET_PSW( out )\

   147 {\

   148 	out = psw & ~(n80 | p20 | z02 | c01);\

   149 	out |= c  >> 8 & c01;\

   150 	out |= dp >> 3 & p20;\

   151 	out |= ((nz >> 4) | nz) & n80;\

   152 	if ( !(uint8_t) nz ) out |= z02;\

   153 }

   154 

   155 #define SET_PSW( in )\

   156 {\

   157 	psw = in;\

   158 	c   = in << 8;\

   159 	dp  = in << 3 & 0x100;\

   160 	nz  = (in << 4 & 0x800) | (~in & z02);\

   161 }

   162 

   163 SPC_CPU_RUN_FUNC

   164 {

   165 	uint8_t* const ram = RAM;

   166 	int a = m.cpu_regs.a;

   167 	int x = m.cpu_regs.x;

   168 	int y = m.cpu_regs.y;

   169 	uint8_t const* pc;

   170 	uint8_t* sp;

   171 	int psw;

   172 	int c;

   173 	int nz;

   174 	int dp;

   175 	

   176 	SET_PC( m.cpu_regs.pc );

   177 	SET_SP( m.cpu_regs.sp );

   178 	SET_PSW( m.cpu_regs.psw );

   179 	

   180 	goto loop;

   181 	

   182 	

   183 	// Main loop

   184 	

   185 cbranch_taken_loop:

   186 	pc += *(BOOST::int8_t const*) pc;

   187 inc_pc_loop:

   188 	pc++;

   189 loop:

   190 {

   191 	unsigned opcode;

   192 	unsigned data;

   193 	

   194 	check( (unsigned) a < 0x100 );

   195 	check( (unsigned) x < 0x100 );

   196 	check( (unsigned) y < 0x100 );

   197 	

   198 	opcode = *pc;

   199 	if ( (rel_time += m.cycle_table [opcode]) > 0 )

   200 		goto out_of_time;

   201 	

   202 	#ifdef SPC_CPU_OPCODE_HOOK

   203 		SPC_CPU_OPCODE_HOOK( GET_PC(), opcode );

   204 	#endif

   205 	/*

   206 	//SUB_CASE_COUNTER( 1 );

   207 	#define PROFILE_TIMER_LOOP( op, addr, len )\

   208 	if ( opcode == op )\

   209 	{\

   210 		int cond = (unsigned) ((addr) - 0xFD) < 3 &&\

   211 				pc [len] == 0xF0 && pc [len+1] == 0xFE - len;\

   212 		SUB_CASE_COUNTER( op && cond );\

   213 	}

   214 	

   215 	PROFILE_TIMER_LOOP( 0xEC, GET_LE16( pc + 1 ), 3 );

   216 	PROFILE_TIMER_LOOP( 0xEB, pc [1], 2 );

   217 	PROFILE_TIMER_LOOP( 0xE4, pc [1], 2 );

   218 	*/

   219 	

   220 	// TODO: if PC is at end of memory, this will get wrong operand (very obscure)

   221 	data = *++pc;

   222 	switch ( opcode )

   223 	{

   224 	

   225 // Common instructions

   226 

   227 #define BRANCH( cond )\

   228 {\

   229 	pc++;\

   230 	pc += (BOOST::int8_t) data;\

   231 	if ( cond )\

   232 		goto loop;\

   233 	pc -= (BOOST::int8_t) data;\

   234 	rel_time -= 2;\

   235 	goto loop;\

   236 }

   237 

   238 	case 0xF0: // BEQ

   239 		BRANCH( !(uint8_t) nz ) // 89% taken

   240 	

   241 	case 0xD0: // BNE

   242 		BRANCH( (uint8_t) nz )

   243 	

   244 	case 0x3F:{// CALL

   245 		int old_addr = GET_PC() + 2;

   246 		SET_PC( READ_PC16( pc ) );

   247 		PUSH16( old_addr );

   248 		goto loop;

   249 	}

   250 	

   251 	case 0x6F:// RET

   252 		#if SPC_NO_SP_WRAPAROUND

   253 		{

   254 			SET_PC( GET_LE16( sp ) );

   255 			sp += 2;

   256 		}

   257 		#else

   258 		{

   259 			int addr = sp - ram;

   260 			SET_PC( GET_LE16( sp ) );

   261 			sp += 2;

   262 			if ( addr < 0x1FF )

   263 				goto loop;

   264 			

   265 			SET_PC( sp [-0x101] * 0x100 + ram [(uint8_t) addr + 0x100] );

   266 			sp -= 0x100;

   267 		}

   268 		#endif

   269 		goto loop;

   270 	

   271 	case 0xE4: // MOV a,dp

   272 		++pc;

   273 		// 80% from timer

   274 		READ_DP_TIMER( 0, data, a = nz );

   275 		goto loop;

   276 	

   277 	case 0xFA:{// MOV dp,dp

   278 		int temp;

   279 		READ_DP_TIMER( -2, data, temp );

   280 		data = temp + no_read_before_write ;

   281 	}

   282 	// fall through

   283 	case 0x8F:{// MOV dp,#imm

   284 		int temp = READ_PC( pc + 1 );

   285 		pc += 2;

   286 		

   287 		#if !SPC_MORE_ACCURACY

   288 		{

   289 			int i = dp + temp;

   290 			ram [i] = (uint8_t) data;

   291 			i -= 0xF0;

   292 			if ( (unsigned) i < 0x10 ) // 76%

   293 			{

   294 				REGS [i] = (uint8_t) data;

   295 				

   296 				// Registers other than $F2 and $F4-$F7

   297 				//if ( i != 2 && i != 4 && i != 5 && i != 6 && i != 7 )

   298 				if ( ((~0x2F00 << (bits_in_int - 16)) << i) < 0 ) // 12%

   299 					cpu_write_smp_reg( data, rel_time, i );

   300 			}

   301 		}

   302 		#else

   303 			WRITE_DP( 0, temp, data );

   304 		#endif

   305 		goto loop;

   306 	}

   307 	

   308 	case 0xC4: // MOV dp,a

   309 		++pc;

   310 		#if !SPC_MORE_ACCURACY

   311 		{

   312 			int i = dp + data;

   313 			ram [i] = (uint8_t) a;

   314 			i -= 0xF0;

   315 			if ( (unsigned) i < 0x10 ) // 39%

   316 			{

   317 				unsigned sel = i - 2;

   318 				REGS [i] = (uint8_t) a;

   319 				

   320 				if ( sel == 1 ) // 51% $F3

   321 					dsp_write( a, rel_time );

   322 				else if ( sel > 1 ) // 1% not $F2 or $F3

   323 					cpu_write_smp_reg_( a, rel_time, i );

   324 			}

   325 		}

   326 		#else

   327 			WRITE_DP( 0, data, a );

   328 		#endif

   329 		goto loop;

   330 	

   331 #define CASE( n )   case n:

   332 

   333 // Define common address modes based on opcode for immediate mode. Execution

   334 // ends with data set to the address of the operand.

   335 #define ADDR_MODES_( op )\

   336 	CASE( op - 0x02 ) /* (X) */\

   337 		data = x + dp;\

   338 		pc--;\

   339 		goto end_##op;\

   340 	CASE( op + 0x0F ) /* (dp)+Y */\

   341 		data = READ_PROG16( data + dp ) + y;\

   342 		goto end_##op;\

   343 	CASE( op - 0x01 ) /* (dp+X) */\

   344 		data = READ_PROG16( ((uint8_t) (data + x)) + dp );\

   345 		goto end_##op;\

   346 	CASE( op + 0x0E ) /* abs+Y */\

   347 		data += y;\

   348 		goto abs_##op;\

   349 	CASE( op + 0x0D ) /* abs+X */\

   350 		data += x;\

   351 	CASE( op - 0x03 ) /* abs */\

   352 	abs_##op:\

   353 		data += 0x100 * READ_PC( ++pc );\

   354 		goto end_##op;\

   355 	CASE( op + 0x0C ) /* dp+X */\

   356 		data = (uint8_t) (data + x);

   357 

   358 #define ADDR_MODES_NO_DP( op )\

   359 	ADDR_MODES_( op )\

   360 		data += dp;\

   361 	end_##op:

   362 

   363 #define ADDR_MODES( op )\

   364 	ADDR_MODES_( op )\

   365 	CASE( op - 0x04 ) /* dp */\

   366 		data += dp;\

   367 	end_##op:

   368 

   369 // 1. 8-bit Data Transmission Commands. Group I

   370 

   371 	ADDR_MODES_NO_DP( 0xE8 ) // MOV A,addr

   372 		a = nz = READ( 0, data );

   373 		goto inc_pc_loop;

   374 	

   375 	case 0xBF:{// MOV A,(X)+

   376 		int temp = x + dp;

   377 		x = (uint8_t) (x + 1);

   378 		a = nz = READ( -1, temp );

   379 		goto loop;

   380 	}

   381 	

   382 	case 0xE8: // MOV A,imm

   383 		a  = data;

   384 		nz = data;

   385 		goto inc_pc_loop;

   386 	

   387 	case 0xF9: // MOV X,dp+Y

   388 		data = (uint8_t) (data + y);

   389 	case 0xF8: // MOV X,dp

   390 		READ_DP_TIMER( 0, data, x = nz );

   391 		goto inc_pc_loop;

   392 	

   393 	case 0xE9: // MOV X,abs

   394 		data = READ_PC16( pc );

   395 		++pc;

   396 		data = READ( 0, data );

   397 	case 0xCD: // MOV X,imm

   398 		x  = data;

   399 		nz = data;

   400 		goto inc_pc_loop;

   401 	

   402 	case 0xFB: // MOV Y,dp+X

   403 		data = (uint8_t) (data + x);

   404 	case 0xEB: // MOV Y,dp

   405 		// 70% from timer

   406 		pc++;

   407 		READ_DP_TIMER( 0, data, y = nz );

   408 		goto loop;

   409 	

   410 	case 0xEC:{// MOV Y,abs

   411 		int temp = READ_PC16( pc );

   412 		pc += 2;

   413 		READ_TIMER( 0, temp, y = nz );

   414 		//y = nz = READ( 0, temp );

   415 		goto loop;

   416 	}

   417 	

   418 	case 0x8D: // MOV Y,imm

   419 		y  = data;

   420 		nz = data;

   421 		goto inc_pc_loop;

   422 	

   423 // 2. 8-BIT DATA TRANSMISSION COMMANDS, GROUP 2

   424 

   425 	ADDR_MODES_NO_DP( 0xC8 ) // MOV addr,A

   426 		WRITE( 0, data, a );

   427 		goto inc_pc_loop;

   428 	

   429 	{

   430 		int temp;

   431 	case 0xCC: // MOV abs,Y

   432 		temp = y;

   433 		goto mov_abs_temp;

   434 	case 0xC9: // MOV abs,X

   435 		temp = x;

   436 	mov_abs_temp:

   437 		WRITE( 0, READ_PC16( pc ), temp );

   438 		pc += 2;

   439 		goto loop;

   440 	}

   441 	

   442 	case 0xD9: // MOV dp+Y,X

   443 		data = (uint8_t) (data + y);

   444 	case 0xD8: // MOV dp,X

   445 		WRITE( 0, data + dp, x );

   446 		goto inc_pc_loop;

   447 	

   448 	case 0xDB: // MOV dp+X,Y

   449 		data = (uint8_t) (data + x);

   450 	case 0xCB: // MOV dp,Y

   451 		WRITE( 0, data + dp, y );

   452 		goto inc_pc_loop;

   453 

   454 // 3. 8-BIT DATA TRANSMISSIN COMMANDS, GROUP 3.

   455 	

   456 	case 0x7D: // MOV A,X

   457 		a  = x;

   458 		nz = x;

   459 		goto loop;

   460 	

   461 	case 0xDD: // MOV A,Y

   462 		a  = y;

   463 		nz = y;

   464 		goto loop;

   465 	

   466 	case 0x5D: // MOV X,A

   467 		x  = a;

   468 		nz = a;

   469 		goto loop;

   470 	

   471 	case 0xFD: // MOV Y,A

   472 		y  = a;

   473 		nz = a;

   474 		goto loop;

   475 	

   476 	case 0x9D: // MOV X,SP

   477 		x = nz = GET_SP();

   478 		goto loop;

   479 	

   480 	case 0xBD: // MOV SP,X

   481 		SET_SP( x );

   482 		goto loop;

   483 	

   484 	//case 0xC6: // MOV (X),A (handled by MOV addr,A in group 2)

   485 	

   486 	case 0xAF: // MOV (X)+,A

   487 		WRITE_DP( 0, x, a + no_read_before_write  );

   488 		x++;

   489 		goto loop;

   490 	

   491 // 5. 8-BIT LOGIC OPERATION COMMANDS

   492 	

   493 #define LOGICAL_OP( op, func )\

   494 	ADDR_MODES( op ) /* addr */\

   495 		data = READ( 0, data );\

   496 	case op: /* imm */\

   497 		nz = a func##= data;\

   498 		goto inc_pc_loop;\

   499 	{   unsigned addr;\

   500 	case op + 0x11: /* X,Y */\

   501 		data = READ_DP( -2, y );\

   502 		addr = x + dp;\

   503 		goto addr_##op;\

   504 	case op + 0x01: /* dp,dp */\

   505 		data = READ_DP( -3, data );\

   506 	case op + 0x10:{/*dp,imm*/\

   507 		uint8_t const* addr2 = pc + 1;\

   508 		pc += 2;\

   509 		addr = READ_PC( addr2 ) + dp;\

   510 	}\

   511 	addr_##op:\

   512 		nz = data func READ( -1, addr );\

   513 		WRITE( 0, addr, nz );\

   514 		goto loop;\

   515 	}

   516 	

   517 	LOGICAL_OP( 0x28, & ); // AND

   518 	

   519 	LOGICAL_OP( 0x08, | ); // OR

   520 	

   521 	LOGICAL_OP( 0x48, ^ ); // EOR

   522 	

   523 // 4. 8-BIT ARITHMETIC OPERATION COMMANDS

   524 

   525 	ADDR_MODES( 0x68 ) // CMP addr

   526 		data = READ( 0, data );

   527 	case 0x68: // CMP imm

   528 		nz = a - data;

   529 		c = ~nz;

   530 		nz &= 0xFF;

   531 		goto inc_pc_loop;

   532 	

   533 	case 0x79: // CMP (X),(Y)

   534 		data = READ_DP( -2, y );

   535 		nz = READ_DP( -1, x ) - data;

   536 		c = ~nz;

   537 		nz &= 0xFF;

   538 		goto loop;

   539 	

   540 	case 0x69: // CMP dp,dp

   541 		data = READ_DP( -3, data );

   542 	case 0x78: // CMP dp,imm

   543 		nz = READ_DP( -1, READ_PC( ++pc ) ) - data;

   544 		c = ~nz;

   545 		nz &= 0xFF;

   546 		goto inc_pc_loop;

   547 	

   548 	case 0x3E: // CMP X,dp

   549 		data += dp;

   550 		goto cmp_x_addr;

   551 	case 0x1E: // CMP X,abs

   552 		data = READ_PC16( pc );

   553 		pc++;

   554 	cmp_x_addr:

   555 		data = READ( 0, data );

   556 	case 0xC8: // CMP X,imm

   557 		nz = x - data;

   558 		c = ~nz;

   559 		nz &= 0xFF;

   560 		goto inc_pc_loop;

   561 	

   562 	case 0x7E: // CMP Y,dp

   563 		data += dp;

   564 		goto cmp_y_addr;

   565 	case 0x5E: // CMP Y,abs

   566 		data = READ_PC16( pc );

   567 		pc++;

   568 	cmp_y_addr:

   569 		data = READ( 0, data );

   570 	case 0xAD: // CMP Y,imm

   571 		nz = y - data;

   572 		c = ~nz;

   573 		nz &= 0xFF;

   574 		goto inc_pc_loop;

   575 	

   576 	{

   577 		int addr;

   578 	case 0xB9: // SBC (x),(y)

   579 	case 0x99: // ADC (x),(y)

   580 		pc--; // compensate for inc later

   581 		data = READ_DP( -2, y );

   582 		addr = x + dp;

   583 		goto adc_addr;

   584 	case 0xA9: // SBC dp,dp

   585 	case 0x89: // ADC dp,dp

   586 		data = READ_DP( -3, data );

   587 	case 0xB8: // SBC dp,imm

   588 	case 0x98: // ADC dp,imm

   589 		addr = READ_PC( ++pc ) + dp;

   590 	adc_addr:

   591 		nz = READ( -1, addr );

   592 		goto adc_data;

   593 		

   594 // catch ADC and SBC together, then decode later based on operand

   595 #undef CASE

   596 #define CASE( n ) case n: case (n) + 0x20:

   597 	ADDR_MODES( 0x88 ) // ADC/SBC addr

   598 		data = READ( 0, data );

   599 	case 0xA8: // SBC imm

   600 	case 0x88: // ADC imm

   601 		addr = -1; // A

   602 		nz = a;

   603 	adc_data: {

   604 		int flags;

   605 		if ( opcode >= 0xA0 ) // SBC

   606 			data ^= 0xFF;

   607 		

   608 		flags = data ^ nz;

   609 		nz += data + (c >> 8 & 1);

   610 		flags ^= nz;

   611 		

   612 		psw = (psw & ~(v40 | h08)) |

   613 				(flags >> 1 & h08) |

   614 				((flags + 0x80) >> 2 & v40);

   615 		c = nz;

   616 		if ( addr < 0 )

   617 		{

   618 			a = (uint8_t) nz;

   619 			goto inc_pc_loop;

   620 		}

   621 		WRITE( 0, addr, /*(uint8_t)*/ nz );

   622 		goto inc_pc_loop;

   623 	}

   624 	

   625 	}

   626 	

   627 // 6. ADDITION & SUBTRACTION COMMANDS

   628 

   629 #define INC_DEC_REG( reg, op )\

   630 		nz  = reg op;\

   631 		reg = (uint8_t) nz;\

   632 		goto loop;

   633 

   634 	case 0xBC: INC_DEC_REG( a, + 1 ) // INC A

   635 	case 0x3D: INC_DEC_REG( x, + 1 ) // INC X

   636 	case 0xFC: INC_DEC_REG( y, + 1 ) // INC Y

   637 	

   638 	case 0x9C: INC_DEC_REG( a, - 1 ) // DEC A

   639 	case 0x1D: INC_DEC_REG( x, - 1 ) // DEC X

   640 	case 0xDC: INC_DEC_REG( y, - 1 ) // DEC Y

   641 

   642 	case 0x9B: // DEC dp+X

   643 	case 0xBB: // INC dp+X

   644 		data = (uint8_t) (data + x);

   645 	case 0x8B: // DEC dp

   646 	case 0xAB: // INC dp

   647 		data += dp;

   648 		goto inc_abs;

   649 	case 0x8C: // DEC abs

   650 	case 0xAC: // INC abs

   651 		data = READ_PC16( pc );

   652 		pc++;

   653 	inc_abs:

   654 		nz = (opcode >> 4 & 2) - 1;

   655 		nz += READ( -1, data );

   656 		WRITE( 0, data, /*(uint8_t)*/ nz );

   657 		goto inc_pc_loop;

   658 	

   659 // 7. SHIFT, ROTATION COMMANDS

   660 

   661 	case 0x5C: // LSR A

   662 		c = 0;

   663 	case 0x7C:{// ROR A

   664 		nz = (c >> 1 & 0x80) | (a >> 1);

   665 		c = a << 8;

   666 		a = nz;

   667 		goto loop;

   668 	}

   669 	

   670 	case 0x1C: // ASL A

   671 		c = 0;

   672 	case 0x3C:{// ROL A

   673 		int temp = c >> 8 & 1;

   674 		c = a << 1;

   675 		nz = c | temp;

   676 		a = (uint8_t) nz;

   677 		goto loop;

   678 	}

   679 	

   680 	case 0x0B: // ASL dp

   681 		c = 0;

   682 		data += dp;

   683 		goto rol_mem;

   684 	case 0x1B: // ASL dp+X

   685 		c = 0;

   686 	case 0x3B: // ROL dp+X

   687 		data = (uint8_t) (data + x);

   688 	case 0x2B: // ROL dp

   689 		data += dp;

   690 		goto rol_mem;

   691 	case 0x0C: // ASL abs

   692 		c = 0;

   693 	case 0x2C: // ROL abs

   694 		data = READ_PC16( pc );

   695 		pc++;

   696 	rol_mem:

   697 		nz = c >> 8 & 1;

   698 		nz |= (c = READ( -1, data ) << 1);

   699 		WRITE( 0, data, /*(uint8_t)*/ nz );

   700 		goto inc_pc_loop;

   701 	

   702 	case 0x4B: // LSR dp

   703 		c = 0;

   704 		data += dp;

   705 		goto ror_mem;

   706 	case 0x5B: // LSR dp+X

   707 		c = 0;

   708 	case 0x7B: // ROR dp+X

   709 		data = (uint8_t) (data + x);

   710 	case 0x6B: // ROR dp

   711 		data += dp;

   712 		goto ror_mem;

   713 	case 0x4C: // LSR abs

   714 		c = 0;

   715 	case 0x6C: // ROR abs

   716 		data = READ_PC16( pc );

   717 		pc++;

   718 	ror_mem: {

   719 		int temp = READ( -1, data );

   720 		nz = (c >> 1 & 0x80) | (temp >> 1);

   721 		c = temp << 8;

   722 		WRITE( 0, data, nz );

   723 		goto inc_pc_loop;

   724 	}

   725 

   726 	case 0x9F: // XCN

   727 		nz = a = (a >> 4) | (uint8_t) (a << 4);

   728 		goto loop;

   729 

   730 // 8. 16-BIT TRANSMISION COMMANDS

   731 

   732 	case 0xBA: // MOVW YA,dp

   733 		a = READ_DP( -2, data );

   734 		nz = (a & 0x7F) | (a >> 1);

   735 		y = READ_DP( 0, (uint8_t) (data + 1) );

   736 		nz |= y;

   737 		goto inc_pc_loop;

   738 	

   739 	case 0xDA: // MOVW dp,YA

   740 		WRITE_DP( -1, data, a );

   741 		WRITE_DP( 0, (uint8_t) (data + 1), y + no_read_before_write  );

   742 		goto inc_pc_loop;

   743 	

   744 // 9. 16-BIT OPERATION COMMANDS

   745 

   746 	case 0x3A: // INCW dp

   747 	case 0x1A:{// DECW dp

   748 		int temp;

   749 		// low byte

   750 		data += dp;

   751 		temp = READ( -3, data );

   752 		temp += (opcode >> 4 & 2) - 1; // +1 for INCW, -1 for DECW

   753 		nz = ((temp >> 1) | temp) & 0x7F;

   754 		WRITE( -2, data, /*(uint8_t)*/ temp );

   755 		

   756 		// high byte

   757 		data = (uint8_t) (data + 1) + dp;

   758 		temp = (uint8_t) ((temp >> 8) + READ( -1, data ));

   759 		nz |= temp;

   760 		WRITE( 0, data, temp );

   761 		

   762 		goto inc_pc_loop;

   763 	}

   764 		

   765 	case 0x7A: // ADDW YA,dp

   766 	case 0x9A:{// SUBW YA,dp

   767 		int lo = READ_DP( -2, data );

   768 		int hi = READ_DP( 0, (uint8_t) (data + 1) );

   769 		int result;

   770 		int flags;

   771 		

   772 		if ( opcode == 0x9A ) // SUBW

   773 		{

   774 			lo = (lo ^ 0xFF) + 1;

   775 			hi ^= 0xFF;

   776 		}

   777 		

   778 		lo += a;

   779 		result = y + hi + (lo >> 8);

   780 		flags = hi ^ y ^ result;

   781 		

   782 		psw = (psw & ~(v40 | h08)) |

   783 				(flags >> 1 & h08) |

   784 				((flags + 0x80) >> 2 & v40);

   785 		c = result;

   786 		a = (uint8_t) lo;

   787 		result = (uint8_t) result;

   788 		y = result;

   789 		nz = (((lo >> 1) | lo) & 0x7F) | result;

   790 		

   791 		goto inc_pc_loop;

   792 	}

   793 	

   794 	case 0x5A: { // CMPW YA,dp

   795 		int temp = a - READ_DP( -1, data );

   796 		nz = ((temp >> 1) | temp) & 0x7F;

   797 		temp = y + (temp >> 8);

   798 		temp -= READ_DP( 0, (uint8_t) (data + 1) );

   799 		nz |= temp;

   800 		c  = ~temp;

   801 		nz &= 0xFF;

   802 		goto inc_pc_loop;

   803 	}

   804 	

   805 // 10. MULTIPLICATION & DIVISON COMMANDS

   806 

   807 	case 0xCF: { // MUL YA

   808 		unsigned temp = y * a;

   809 		a = (uint8_t) temp;

   810 		nz = ((temp >> 1) | temp) & 0x7F;

   811 		y = temp >> 8;

   812 		nz |= y;

   813 		goto loop;

   814 	}

   815 	

   816 	case 0x9E: // DIV YA,X

   817 	{

   818 		unsigned ya = y * 0x100 + a;

   819 		

   820 		psw &= ~(h08 | v40);

   821 		

   822 		if ( y >= x )

   823 			psw |= v40;

   824 		

   825 		if ( (y & 15) >= (x & 15) )

   826 			psw |= h08;

   827 		

   828 		if ( y < x * 2 )

   829 		{

   830 			a = ya / x;

   831 			y = ya - a * x;

   832 		}

   833 		else

   834 		{

   835 			a = 255 - (ya - x * 0x200) / (256 - x);

   836 			y = x   + (ya - x * 0x200) % (256 - x);

   837 		}

   838 		

   839 		nz = (uint8_t) a;

   840 		a = (uint8_t) a;

   841 		

   842 		goto loop;

   843 	}

   844 	

   845 // 11. DECIMAL COMPENSATION COMMANDS

   846 	

   847 	case 0xDF: // DAA

   848 		SUSPICIOUS_OPCODE( "DAA" );

   849 		if ( a > 0x99 || c & 0x100 )

   850 		{

   851 			a += 0x60;

   852 			c = 0x100;

   853 		}

   854 		

   855 		if ( (a & 0x0F) > 9 || psw & h08 )

   856 			a += 0x06;

   857 		

   858 		nz = a;

   859 		a = (uint8_t) a;

   860 		goto loop;

   861 	

   862 	case 0xBE: // DAS

   863 		SUSPICIOUS_OPCODE( "DAS" );

   864 		if ( a > 0x99 || !(c & 0x100) )

   865 		{

   866 			a -= 0x60;

   867 			c = 0;

   868 		}

   869 		

   870 		if ( (a & 0x0F) > 9 || !(psw & h08) )

   871 			a -= 0x06;

   872 		

   873 		nz = a;

   874 		a = (uint8_t) a;

   875 		goto loop;

   876 	

   877 // 12. BRANCHING COMMANDS

   878 

   879 	case 0x2F: // BRA rel

   880 		pc += (BOOST::int8_t) data;

   881 		goto inc_pc_loop;

   882 	

   883 	case 0x30: // BMI

   884 		BRANCH( (nz & nz_neg_mask) )

   885 	

   886 	case 0x10: // BPL

   887 		BRANCH( !(nz & nz_neg_mask) )

   888 	

   889 	case 0xB0: // BCS

   890 		BRANCH( c & 0x100 )

   891 	

   892 	case 0x90: // BCC

   893 		BRANCH( !(c & 0x100) )

   894 	

   895 	case 0x70: // BVS

   896 		BRANCH( psw & v40 )

   897 	

   898 	case 0x50: // BVC

   899 		BRANCH( !(psw & v40) )

   900 	

   901 	#define CBRANCH( cond )\

   902 	{\

   903 		pc++;\

   904 		if ( cond )\

   905 			goto cbranch_taken_loop;\

   906 		rel_time -= 2;\

   907 		goto inc_pc_loop;\

   908 	}

   909 	

   910 	case 0x03: // BBS dp.bit,rel

   911 	case 0x23:

   912 	case 0x43:

   913 	case 0x63:

   914 	case 0x83:

   915 	case 0xA3:

   916 	case 0xC3:

   917 	case 0xE3:

   918 		CBRANCH( READ_DP( -4, data ) >> (opcode >> 5) & 1 )

   919 	

   920 	case 0x13: // BBC dp.bit,rel

   921 	case 0x33:

   922 	case 0x53:

   923 	case 0x73:

   924 	case 0x93:

   925 	case 0xB3:

   926 	case 0xD3:

   927 	case 0xF3:

   928 		CBRANCH( !(READ_DP( -4, data ) >> (opcode >> 5) & 1) )

   929 	

   930 	case 0xDE: // CBNE dp+X,rel

   931 		data = (uint8_t) (data + x);

   932 		// fall through

   933 	case 0x2E:{// CBNE dp,rel

   934 		int temp;

   935 		// 61% from timer

   936 		READ_DP_TIMER( -4, data, temp );

   937 		CBRANCH( temp != a )

   938 	}

   939 	

   940 	case 0x6E: { // DBNZ dp,rel

   941 		unsigned temp = READ_DP( -4, data ) - 1;

   942 		WRITE_DP( -3, (uint8_t) data, /*(uint8_t)*/ temp + no_read_before_write  );

   943 		CBRANCH( temp )

   944 	}

   945 	

   946 	case 0xFE: // DBNZ Y,rel

   947 		y = (uint8_t) (y - 1);

   948 		BRANCH( y )

   949 	

   950 	case 0x1F: // JMP [abs+X]

   951 		SET_PC( READ_PC16( pc ) + x );

   952 		// fall through

   953 	case 0x5F: // JMP abs

   954 		SET_PC( READ_PC16( pc ) );

   955 		goto loop;

   956 	

   957 // 13. SUB-ROUTINE CALL RETURN COMMANDS

   958 	

   959 	case 0x0F:{// BRK

   960 		int temp;

   961 		int ret_addr = GET_PC();

   962 		SUSPICIOUS_OPCODE( "BRK" );

   963 		SET_PC( READ_PROG16( 0xFFDE ) ); // vector address verified

   964 		PUSH16( ret_addr );

   965 		GET_PSW( temp );

   966 		psw = (psw | b10) & ~i04;

   967 		PUSH( temp );

   968 		goto loop;

   969 	}

   970 	

   971 	case 0x4F:{// PCALL offset

   972 		int ret_addr = GET_PC() + 1;

   973 		SET_PC( 0xFF00 | data );

   974 		PUSH16( ret_addr );

   975 		goto loop;

   976 	}

   977 	

   978 	case 0x01: // TCALL n

   979 	case 0x11:

   980 	case 0x21:

   981 	case 0x31:

   982 	case 0x41:

   983 	case 0x51:

   984 	case 0x61:

   985 	case 0x71:

   986 	case 0x81:

   987 	case 0x91:

   988 	case 0xA1:

   989 	case 0xB1:

   990 	case 0xC1:

   991 	case 0xD1:

   992 	case 0xE1:

   993 	case 0xF1: {

   994 		int ret_addr = GET_PC();

   995 		SET_PC( READ_PROG16( 0xFFDE - (opcode >> 3) ) );

   996 		PUSH16( ret_addr );

   997 		goto loop;

   998 	}

   999 	

  1000 // 14. STACK OPERATION COMMANDS

  1001 

  1002 	{

  1003 		int temp;

  1004 	case 0x7F: // RET1

  1005 		temp = *sp;

  1006 		SET_PC( GET_LE16( sp + 1 ) );

  1007 		sp += 3;

  1008 		goto set_psw;

  1009 	case 0x8E: // POP PSW

  1010 		POP( temp );

  1011 	set_psw:

  1012 		SET_PSW( temp );

  1013 		goto loop;

  1014 	}

  1015 	

  1016 	case 0x0D: { // PUSH PSW

  1017 		int temp;

  1018 		GET_PSW( temp );

  1019 		PUSH( temp );

  1020 		goto loop;

  1021 	}

  1022 

  1023 	case 0x2D: // PUSH A

  1024 		PUSH( a );

  1025 		goto loop;

  1026 	

  1027 	case 0x4D: // PUSH X

  1028 		PUSH( x );

  1029 		goto loop;

  1030 	

  1031 	case 0x6D: // PUSH Y

  1032 		PUSH( y );

  1033 		goto loop;

  1034 	

  1035 	case 0xAE: // POP A

  1036 		POP( a );

  1037 		goto loop;

  1038 	

  1039 	case 0xCE: // POP X

  1040 		POP( x );

  1041 		goto loop;

  1042 	

  1043 	case 0xEE: // POP Y

  1044 		POP( y );

  1045 		goto loop;

  1046 	

  1047 // 15. BIT OPERATION COMMANDS

  1048 

  1049 	case 0x02: // SET1

  1050 	case 0x22:

  1051 	case 0x42:

  1052 	case 0x62:

  1053 	case 0x82:

  1054 	case 0xA2:

  1055 	case 0xC2:

  1056 	case 0xE2:

  1057 	case 0x12: // CLR1

  1058 	case 0x32:

  1059 	case 0x52:

  1060 	case 0x72:

  1061 	case 0x92:

  1062 	case 0xB2:

  1063 	case 0xD2:

  1064 	case 0xF2: {

  1065 		int bit = 1 << (opcode >> 5);

  1066 		int mask = ~bit;

  1067 		if ( opcode & 0x10 )

  1068 			bit = 0;

  1069 		data += dp;

  1070 		WRITE( 0, data, (READ( -1, data ) & mask) | bit );

  1071 		goto inc_pc_loop;

  1072 	}

  1073 		

  1074 	case 0x0E: // TSET1 abs

  1075 	case 0x4E: // TCLR1 abs

  1076 		data = READ_PC16( pc );

  1077 		pc += 2;

  1078 		{

  1079 			unsigned temp = READ( -2, data );

  1080 			nz = (uint8_t) (a - temp);

  1081 			temp &= ~a;

  1082 			if ( opcode == 0x0E )

  1083 				temp |= a;

  1084 			WRITE( 0, data, temp );

  1085 		}

  1086 		goto loop;

  1087 	

  1088 	case 0x4A: // AND1 C,mem.bit

  1089 		c &= MEM_BIT( 0 );

  1090 		pc += 2;

  1091 		goto loop;

  1092 	

  1093 	case 0x6A: // AND1 C,/mem.bit

  1094 		c &= ~MEM_BIT( 0 );

  1095 		pc += 2;

  1096 		goto loop;

  1097 	

  1098 	case 0x0A: // OR1 C,mem.bit

  1099 		c |= MEM_BIT( -1 );

  1100 		pc += 2;

  1101 		goto loop;

  1102 	

  1103 	case 0x2A: // OR1 C,/mem.bit

  1104 		c |= ~MEM_BIT( -1 );

  1105 		pc += 2;

  1106 		goto loop;

  1107 	

  1108 	case 0x8A: // EOR1 C,mem.bit

  1109 		c ^= MEM_BIT( -1 );

  1110 		pc += 2;

  1111 		goto loop;

  1112 	

  1113 	case 0xEA: // NOT1 mem.bit

  1114 		data = READ_PC16( pc );

  1115 		pc += 2;

  1116 		{

  1117 			unsigned temp = READ( -1, data & 0x1FFF );

  1118 			temp ^= 1 << (data >> 13);

  1119 			WRITE( 0, data & 0x1FFF, temp );

  1120 		}

  1121 		goto loop;

  1122 	

  1123 	case 0xCA: // MOV1 mem.bit,C

  1124 		data = READ_PC16( pc );

  1125 		pc += 2;

  1126 		{

  1127 			unsigned temp = READ( -2, data & 0x1FFF );

  1128 			unsigned bit = data >> 13;

  1129 			temp = (temp & ~(1 << bit)) | ((c >> 8 & 1) << bit);

  1130 			WRITE( 0, data & 0x1FFF, temp + no_read_before_write  );

  1131 		}

  1132 		goto loop;

  1133 	

  1134 	case 0xAA: // MOV1 C,mem.bit

  1135 		c = MEM_BIT( 0 );

  1136 		pc += 2;

  1137 		goto loop;

  1138 	

  1139 // 16. PROGRAM PSW FLAG OPERATION COMMANDS

  1140 

  1141 	case 0x60: // CLRC

  1142 		c = 0;

  1143 		goto loop;

  1144 		

  1145 	case 0x80: // SETC

  1146 		c = ~0;

  1147 		goto loop;

  1148 	

  1149 	case 0xED: // NOTC

  1150 		c ^= 0x100;

  1151 		goto loop;

  1152 		

  1153 	case 0xE0: // CLRV

  1154 		psw &= ~(v40 | h08);

  1155 		goto loop;

  1156 	

  1157 	case 0x20: // CLRP

  1158 		dp = 0;

  1159 		goto loop;

  1160 	

  1161 	case 0x40: // SETP

  1162 		dp = 0x100;

  1163 		goto loop;

  1164 	

  1165 	case 0xA0: // EI

  1166 		SUSPICIOUS_OPCODE( "EI" );

  1167 		psw |= i04;

  1168 		goto loop;

  1169 	

  1170 	case 0xC0: // DI

  1171 		SUSPICIOUS_OPCODE( "DI" );

  1172 		psw &= ~i04;

  1173 		goto loop;

  1174 	

  1175 // 17. OTHER COMMANDS

  1176 

  1177 	case 0x00: // NOP

  1178 		goto loop;

  1179 	

  1180 	case 0xFF:{// STOP

  1181 		// handle PC wrap-around

  1182 		unsigned addr = GET_PC() - 1;

  1183 		if ( addr >= 0x10000 )

  1184 		{

  1185 			addr &= 0xFFFF;

  1186 			SET_PC( addr );

  1187 			dprintf( "SPC: PC wrapped around\n" );

  1188 			goto loop;

  1189 		}

  1190 	}

  1191 	// fall through

  1192 	case 0xEF: // SLEEP

  1193 		SUSPICIOUS_OPCODE( "STOP/SLEEP" );

  1194 		--pc;

  1195 		rel_time = 0;

  1196 		m.cpu_error = "SPC emulation error";

  1197 		goto stop;

  1198 	} // switch

  1199 	

  1200 	assert( 0 ); // catch any unhandled instructions

  1201 }   

  1202 out_of_time:

  1203 	rel_time -= m.cycle_table [*pc]; // undo partial execution of opcode

  1204 stop:

  1205 	

  1206 	// Uncache registers

  1207 	if ( GET_PC() >= 0x10000 )

  1208 		dprintf( "SPC: PC wrapped around\n" );

  1209 	m.cpu_regs.pc = (uint16_t) GET_PC();

  1210 	m.cpu_regs.sp = ( uint8_t) GET_SP();

  1211 	m.cpu_regs.a  = ( uint8_t) a;

  1212 	m.cpu_regs.x  = ( uint8_t) x;

  1213 	m.cpu_regs.y  = ( uint8_t) y;

  1214 	{

  1215 		int temp;

  1216 		GET_PSW( temp );

  1217 		m.cpu_regs.psw = (uint8_t) temp;

  1218 	}

  1219 }

  1220 SPC_CPU_RUN_FUNC_END
author	Robert McIntyre <rlm@mit.edu>
date	Fri, 21 Oct 2011 07:12:40 -0700
parents	e38dacceb958
children