#+title: 

 #+author: Robert McIntyre

 #+email: rlm@mit.edu

 #+description: sensory utilities

 #+keywords: simulation, jMonkeyEngine3, clojure, simulated senses

 #+SETUPFILE: ../../aurellem/org/setup.org

 #+INCLUDE: ../../aurellem/org/level-0.org

 

 

 * Blender Utilities

 In blender, any object can be assigned an arbitray number of key-value

 pairs which are called "Custom Properties". These are accessable in

 jMonkyeEngine when blender files are imported with the

 =BlenderLoader=. =(meta-data)= extracts these properties.

 

 #+name: blender-1

 #+begin_src clojure

 (defn meta-data

   "Get the meta-data for a node created with blender."

   [blender-node key]

   (if-let [data (.getUserData blender-node "properties")]

     (.findValue data key) nil))

 #+end_src

 

 Blender uses a different coordinate system than jMonkeyEngine so it

 is useful to be able to convert between the two. These only come into

 play when the meta-data of a node refers to a vector in the blender

 coordinate system.

 

 #+name: blender-2

 #+begin_src clojure

 (defn jme-to-blender

   "Convert from JME coordinates to Blender coordinates"

   [#^Vector3f in]

   (Vector3f. (.getX in) (- (.getZ in)) (.getY in)))

 

 (defn blender-to-jme

   "Convert from Blender coordinates to JME coordinates"

   [#^Vector3f in]

   (Vector3f. (.getX in) (.getZ in) (- (.getY in))))

 #+end_src

 

 * Sense Topology

 

 Human beings are three-dimensional objects, and the nerves that

 transmit data from our various sense organs to our brain are

 essentially one-dimensional. This leaves up to two dimensions in which

 our sensory information may flow.  For example, imagine your skin: it

 is a two-dimensional surface around a three-dimensional object (your

 body). It has discrete touch sensors embedded at various points, and

 the density of these sensors corresponds to the sensitivity of that

 region of skin. Each touch sensor connects to a nerve, all of which

 eventually are bundled together as they travel up the spinal cord to

 the brain. Intersect the spinal nerves with a guillotining plane and

 you will see all of the sensory data of the skin revealed in a roughly

 circular two-dimensional image which is the cross section of the

 spinal cord.  Points on this image that are close together in this

 circle represent touch sensors that are /probably/ close together on

 the skin, although there is of course some cutting and rerangement

 that has to be done to transfer the complicated surface of the skin

 onto a two dimensional image.

 

 Most human senses consist of many discrete sensors of various

 properties distributed along a surface at various densities.  For

 skin, it is Pacinian corpuscles, Meissner's corpuscles, Merkel's

 disks, and Ruffini's endings, which detect pressure and vibration of

 various intensities.  For ears, it is the stereocilia distributed

 along the basilar membrane inside the cochlea; each one is sensitive

 to a slightly different frequency of sound. For eyes, it is rods

 and cones distributed along the surface of the retina. In each case,

 we can describe the sense with a surface and a distribution of sensors

 along that surface.

 

 ** UV-maps

 

 Blender and jMonkeyEngine already have support for exactly this sort

 of data structure because it is used to "skin" models for games. It is

 called [[http://wiki.blender.org/index.php/Doc:2.6/Manual/Textures/Mapping/UV][UV-mapping]].  The three-dimensional surface is cut and smooshed

 until it fits on a two-dimensional image. You paint whatever you want

 on that image, and when the three-dimensional shape is rendered in a

 game that image the smooshing and cutting us reversed and the image

 appears on the three-dimensional object.

 

 To make a sense, interpret the UV-image as describing the distribution

 of that senses sensors. To get different types of sensors, you can

 either use a different color for each type of sensor, or use multiple

 UV-maps, each labeled with that sensor type. I generally use a white

 pixel to mean the presense of a sensor and a black pixel to mean the

 absense of a sensor, and use one UV-map for each sensor-type within a

 given sense.  The paths to the images are not stored as the actual

 UV-map of the blender object but are instead referenced in the

 meta-data of the node.

 

 #+CAPTION: The UV-map for an enlongated icososphere. The white dots each represent a touch sensor. They are dense in the regions that describe the tip of the finger, and less dense along the dorsal side of the finger opposite the tip.

 #+ATTR_HTML: width="300"

 [[../images/finger-UV.png]]

 

 #+CAPTION: Ventral side of the UV-mapped finger. Notice the density of touch sensors at the tip.

 #+ATTR_HTML: width="300"

 [[../images/finger-1.png]]

 

 #+CAPTION: Side view of the UV-mapped finger.

 #+ATTR_HTML: width="300"

 [[../images/finger-2.png]]

 

 #+CAPTION: Head on view of the finger. In both the head and side views you can see the divide where the touch-sensors transition from high density to low density.

 #+ATTR_HTML: width="300"

 [[../images/finger-3.png]]

 

 The following code loads images and gets the locations of the white

 pixels so that they can be used to create senses. =(load-image)= finds

 images using jMonkeyEngine's asset-manager, so the image path is

 expected to be relative to the =assets= directory.  Thanks to Dylan

 for the beautiful version of filter-pixels.

 

 #+name: topology-1

 #+begin_src clojure

 (defn load-image

   "Load an image as a BufferedImage using the asset-manager system." 

   [asset-relative-path]

   (ImageToAwt/convert

    (.getImage (.loadTexture (asset-manager) asset-relative-path))

    false false 0))

 

 (def white 0xFFFFFF)

 

 (defn white? [rgb]

   (= (bit-and white rgb) white))

 

 (defn filter-pixels

   "List the coordinates of all pixels matching pred, within the bounds

    provided. If bounds are not specified then the entire image is

    searched.

    bounds -> [x0 y0 width height]"

   {:author "Dylan Holmes"}

   ([pred #^BufferedImage image]

      (filter-pixels pred image [0 0 (.getWidth image) (.getHeight image)]))

   ([pred #^BufferedImage image [x0 y0 width height]]

      ((fn accumulate [x y matches]

         (cond

          (>= y (+ height y0)) matches

          (>= x (+ width x0)) (recur 0 (inc y) matches)

          (pred (.getRGB image x y))

          (recur (inc x) y (conj matches [x y]))

          :else (recur (inc x) y matches)))

       x0 y0 [])))

 

 (defn white-coordinates

   "Coordinates of all the white pixels in a subset of the image."

   ([#^BufferedImage image bounds]

      (filter-pixels white? image bounds))

   ([#^BufferedImage image]

      (filter-pixels white? image)))

 #+end_src

 

 ** Topology

 

 Information from the senses is transmitted to the brain via bundles of

 axons, whether it be the optic nerve or the spinal cord. While these

 bundles more or less perserve the overall topology of a sense's

 two-dimensional surface, they do not perserve the percise euclidean

 distances between every sensor. =(collapse)= is here to smoosh the

 sensors described by a UV-map into a contigous region that still

 perserves the topology of the original sense.

 

 #+name: topology-2

 #+begin_src clojure

 (defn average [coll]

   (/ (reduce + coll) (count coll)))

 

 (defn collapse-1d

   "One dimensional analogue of collapse."

   [center line]

   (let [length (count line)

         num-above (count (filter (partial < center) line))

         num-below (- length num-above)]

     (range (- center num-below)

            (+ center num-above))))

 

 (defn collapse

   "Take a set of pairs of integers and collapse them into a

    contigous bitmap with no \"holes\"."

   [points]

   (if (empty? points) []

       (let

           [num-points (count points)

            center (vector

                    (int (average (map first points)))

                    (int (average (map first points))))

            flattened

            (reduce

             concat 

             (map

              (fn [column]

                (map vector

                     (map first column)

                     (collapse-1d (second center)

                                  (map second column))))

              (partition-by first (sort-by first points))))

            squeezed

            (reduce

             concat 

             (map

              (fn [row]

                (map vector

                     (collapse-1d (first center)

                                  (map first row))

                     (map second row)))

              (partition-by second (sort-by second flattened))))

            relocated

            (let [min-x (apply min (map first squeezed))

                  min-y (apply min (map second squeezed))]

              (map (fn [[x y]]

                     [(- x min-x)

                      (- y min-y)])

                   squeezed))]

         relocated)))

 #+end_src

 * Viewing Sense Data

 

 It's vital to /see/ the sense data to make sure that everything is

 behaving as it should. =(view-sense)= is here so that each sense can

 define its own way of turning sense-data into pictures, while the

 actual rendering of said pictures stays in one central place.

 =(points->image)= helps senses generate a base image onto which they

 can overlay actual sense data.

 

 #+name: view-senses

 #+begin_src clojure

 (in-ns 'cortex.sense)

 

 (defn points->image

   "Take a collection of points and visuliaze it as a BufferedImage."

   [points]

   (if (empty? points)

     (BufferedImage. 1 1 BufferedImage/TYPE_BYTE_BINARY)

     (let [xs (vec (map first points))

           ys (vec (map second points))

           x0 (apply min xs)

           y0 (apply min ys)

           width (- (apply max xs) x0)

           height (- (apply max ys) y0)

           image (BufferedImage. (inc width) (inc height)

                                 BufferedImage/TYPE_INT_RGB)]

       (dorun

        (for [x (range (.getWidth image))

              y (range (.getHeight image))]

          (.setRGB image x y 0xFF0000)))

       (dorun 

        (for [index (range (count points))]

          (.setRGB image (- (xs index) x0) (- (ys index) y0) -1)))

       image)))

 

 (defn view-image

   "Initailizes a JPanel on which you may draw a BufferedImage.

    Returns a function that accepts a BufferedImage and draws it to the

    JPanel. If given a directory it will save the images as png files

    starting at 0000000.png and incrementing from there."

   ([#^File save]

      (let [idx (atom -1)

            image

            (atom

             (BufferedImage. 1 1 BufferedImage/TYPE_4BYTE_ABGR))

            panel 

            (proxy [JPanel] []

              (paint

                [graphics]

                (proxy-super paintComponent graphics)

                (.drawImage graphics @image 0 0 nil)))

            frame (JFrame. "Display Image")]

        (SwingUtilities/invokeLater

         (fn []

           (doto frame

             (-> (.getContentPane) (.add panel))

             (.pack)

             (.setLocationRelativeTo nil)

             (.setResizable true)

             (.setVisible true))))

        (fn [#^BufferedImage i]

          (reset! image i)

          (.setSize frame (+ 8 (.getWidth i)) (+ 28 (.getHeight i)))

          (.repaint panel 0 0 (.getWidth i) (.getHeight i))

          (if save

            (ImageIO/write

             i "png"

             (File. save (format "%07d.png" (swap! idx inc))))))))

   ([] (view-image nil)))

 

 (defn view-sense 

   "Take a kernel that produces a BufferedImage from some sense data

    and return a function which takes a list of sense data, uses the

    kernel to convert to images, and displays those images, each in

    its own JFrame."

   [sense-display-kernel]

   (let [windows (atom [])]

     (fn [data]

       (if (> (count data) (count @windows))

         (reset! 

          windows (map (fn [_] (view-image)) (range (count data)))))

       (dorun

        (map

         (fn [display datum]

           (display (sense-display-kernel datum)))

         @windows data)))))

 

 (defn gray

   "Create a gray RGB pixel with R, G, and B set to num. num must be

    between 0 and 255."

   [num]

   (+ num

      (bit-shift-left num 8)

      (bit-shift-left num 16)))

 #+end_src

 

 * Building a Sense from Nodes

 My method for defining senses in blender is the following:

 

 Senses like vision and hearing are localized to a single point

 and follow a particular object around.  For these:

 

  - Create a single top-level empty node whose name is the name of the sense

  - Add empty nodes which each contain meta-data relevant

    to the sense, including a UV-map describing the number/distribution

    of sensors if applicipable.

  - Make each empty-node the child of the top-level

    node. =(sense-nodes)= below generates functions to find these children.

 

 For touch, store the path to the UV-map which describes touch-sensors in the

 meta-data of the object to which that map applies.

 

 Each sense provides code that analyzes the Node structure of the

 creature and creates sense-functions.  They also modify the Node

 structure if necessary.

 

 Empty nodes created in blender have no appearance or physical presence

 in jMonkeyEngine, but do appear in the scene graph. Empty nodes that

 represent a sense which "follows" another geometry (like eyes and

 ears) follow the closest physical object.  =(closest-node)= finds this

 closest object given the Creature and a particular empty node.

 

 #+name: node-1

 #+begin_src clojure

 (defn sense-nodes

   "For some senses there is a special empty blender node whose

    children are considered markers for an instance of that sense. This

    function generates functions to find those children, given the name

    of the special parent node."

   [parent-name]

   (fn [#^Node creature]

     (if-let [sense-node (.getChild creature parent-name)]

       (seq (.getChildren sense-node))

       (do (println-repl "could not find" parent-name "node") []))))

 

 (defn closest-node

   "Return the node in creature which is closest to the given node."

   [#^Node creature #^Node empty]

   (loop [radius (float 0.01)]

     (let [results (CollisionResults.)]

       (.collideWith

        creature

        (BoundingBox. (.getWorldTranslation empty)

                      radius radius radius)

        results)

       (if-let [target (first results)]

         (.getGeometry target)

         (recur (float (* 2 radius)))))))

 

 (defn world-to-local

   "Convert the world coordinates into coordinates relative to the 

    object (i.e. local coordinates), taking into account the rotation

    of object."

   [#^Spatial object world-coordinate]

   (.worldToLocal object world-coordinate nil))

 

 (defn local-to-world

   "Convert the local coordinates into world relative coordinates"

   [#^Spatial object local-coordinate]

   (.localToWorld object local-coordinate nil))

 #+end_src

 

 =(bind-sense)= binds either a Camera or a Listener object to any

 object so that they will follow that object no matter how it

 moves. It is used to create both eyes and ears.

 

 #+name: node-2

 #+begin_src clojure

 (defn bind-sense

   "Bind the sense to the Spatial such that it will maintain its

    current position relative to the Spatial no matter how the spatial

    moves. 'sense can be either a Camera or Listener object."

   [#^Spatial obj sense]

   (let [sense-offset (.subtract (.getLocation sense)

                                 (.getWorldTranslation obj))

         initial-sense-rotation (Quaternion. (.getRotation sense))

         base-anti-rotation (.inverse (.getWorldRotation obj))]

     (.addControl

      obj

      (proxy [AbstractControl] []

        (controlUpdate [tpf]

          (let [total-rotation

                (.mult base-anti-rotation (.getWorldRotation obj))]

            (.setLocation

             sense

             (.add

              (.mult total-rotation sense-offset)

              (.getWorldTranslation obj)))

            (.setRotation

             sense

             (.mult total-rotation initial-sense-rotation))))

        (controlRender [_ _])))))

 #+end_src

 

 Here is some example code which shows a camera bound to a blue

 box as it is buffeted by white cannonballs.

 

 #+name: test

 #+begin_src clojure 

 (ns cortex.test.sense

   (:use (cortex world util sense vision))

   (:import

    java.io.File

    (com.jme3.math Vector3f ColorRGBA)

    (com.aurellem.capture RatchetTimer Capture)))

 

 (defn test-bind-sense

   "Show a camera that stays in the same relative position to a blue cube."

   []

   (let [camera-pos (Vector3f. 0 30 0)

         rock (box 1 1 1 :color ColorRGBA/Blue

                   :position (Vector3f. 0 10 0)

                   :mass 30)

         rot (.getWorldRotation rock)

         table (box 3 1 10 :color ColorRGBA/Gray :mass 0

                    :position (Vector3f. 0 -3 0))]

     (world

      (nodify [rock table])

      standard-debug-controls

      (fn [world]

        (let 

            [cam (doto (.clone (.getCamera world))

                   (.setLocation camera-pos)

                   (.lookAt Vector3f/ZERO

                            Vector3f/UNIT_X))]

          (bind-sense rock cam)

          (.setTimer world (RatchetTimer. 60))

          (Capture/captureVideo

           world (File. "/home/r/proj/cortex/render/bind-sense0"))

          (add-camera!

           world cam

           (comp (view-image

                  (File. "/home/r/proj/cortex/render/bind-sense1"))

                 BufferedImage!))

          (add-camera! world (.getCamera world) no-op)))

      no-op)))

 #+end_src

 

 ** Demo Video

 

 #+begin_html

 <video controls="controls" width="755">

   <source src="../video/bind-sense.ogg" type="video/ogg"

 	  preload="none" poster="../images/aurellem-1280x480.png" />

 </video>

 

 #+end_html

 

 note to self: the video was created with the following commands:

 

 

 #+begin_src clojure :results silent

 (in-ns 'user)

 (import java.io.File)

 (use 'clojure.contrib.shell-out)

 

 (let

     [idx (atom -1)

      left (rest 

            (sort

            (file-seq (File. "/home/r/proj/cortex/render/bind-sense0/"))))

      right (rest

             (sort

              (file-seq (File. "/home/r/proj/cortex/render/bind-sense1/"))))]

   (dorun

    (map  

     (fn [im-1 im-2]

       (println idx)

       (sh "convert" (.getCanonicalPath im-1)

           (.getCanonicalPath im-2) "+append"

           (.getCanonicalPath

            (File. "/home/r/proj/cortex/render/bind-sense/"

                   (format "%07d.png" (swap! idx inc))))))

     left right)))

 #+end_src

 

 #+begin_src sh :results silent

 cd /home/r/proj/cortex/render/

 cp ../images/aurellem-1280x480.png bind-sense/0000000.png             

 ffmpeg -r 60 -b 9000k -i bind-sense/%07d.png bind-sense.ogg

 #+end_src

 

 

 

 * Bookkeeping

 Here is the header for this namespace, included for completness.

 #+name: header

 #+begin_src clojure

 (ns cortex.sense

   "Here are functions useful in the construction of two or more

    sensors/effectors."

   {:author "Robert McInytre"}

   (:use (cortex world util))

   (:import ij.process.ImageProcessor)

   (:import jme3tools.converters.ImageToAwt)

   (:import java.awt.image.BufferedImage)

   (:import com.jme3.collision.CollisionResults)

   (:import com.jme3.bounding.BoundingBox)

   (:import (com.jme3.scene Node Spatial))

   (:import com.jme3.scene.control.AbstractControl)

   (:import (com.jme3.math Quaternion Vector3f))

   (:import javax.imageio.ImageIO)

   (:import java.io.File)

   (:import (javax.swing JPanel JFrame SwingUtilities)))

 

 #+end_src

 

 * Source Listing

   Full source: [[../src/cortex/sense.clj][sense.clj]]

 

 

 * COMMENT generate source

 #+begin_src clojure :tangle ../src/cortex/sense.clj

 <<header>>

 <<blender-1>>

 <<blender-2>>

 <<topology-1>>

 <<topology-2>>

 <<node-1>>

 <<node-2>>

 <<view-senses>>

 #+end_src

 

 #+begin_src clojure :tangle ../src/cortex/test/sense.clj

 <<test>>

 #+end_src