rlm@0: Source Install
rlm@0: ==============
rlm@0: 
rlm@0: To install OpenAL Soft, use your favorite shell to go into the build/
rlm@0: directory, and run:
rlm@0: 
rlm@0: cmake ..
rlm@0: 
rlm@0: Assuming configuration went well, you can then build it, typically using GNU
rlm@0: Make (KDevelop, MSVC, and others are possible depending on your system setup
rlm@0: and CMake configuration).
rlm@0: 
rlm@0: Please Note: Double check that the appropriate backends were detected. Often,
rlm@0: complaints of no sound, crashing, and missing devices can be solved by making
rlm@0: sure the correct backends are being used. CMake's output will identify which
rlm@0: backends were enabled.
rlm@0: 
rlm@0: For most systems, you will likely want to make sure ALSA, OSS, and PulseAudio
rlm@0: were detected (if your target system uses them). For Windows, make sure
rlm@0: DirectSound was detected.
rlm@0: 
rlm@0: 
rlm@0: Utilities
rlm@0: =========
rlm@0: 
rlm@0: The source package comes with an informational utility, openal-info, and is
rlm@0: built by default. It prints out information provided by the ALC and AL sub-
rlm@0: systems, including discovered devices, version information, and extensions.
rlm@0: 
rlm@0: 
rlm@0: Configuration
rlm@0: =============
rlm@0: 
rlm@0: OpenAL Soft can be configured on a per-user and per-system basis. This allows
rlm@0: users and sysadmins to control information provided to applications, as well
rlm@0: as application-agnostic behavior of the library. See alsoftrc.sample for
rlm@0: available settings.
rlm@0: 
rlm@0: 
rlm@0: Acknowledgements
rlm@0: ================
rlm@0: 
rlm@0: Special thanks go to:
rlm@0: 
rlm@0: Creative Labs for the original source code this is based off of.
rlm@0: 
rlm@0: Christopher Fitzgerald for the current reverb effect implementation, and
rlm@0: helping with the low-pass filter.
rlm@0: 
rlm@0: Christian Borss for the 3D panning code the current implementation is heavilly
rlm@0: based on.
rlm@0: 
rlm@0: Ben Davis for the idea behind the current click-removal code.